Storing grapple hoses

Velma

Member

Equipment
B2301, FDR1660, RB1560, SGC0554, Pats QH, CMP Dethatcher
May 12, 2022
85
53
18
MI
I watched a short youtube video (Link Here) from a company who shall not be named (rhymes with beer) that was demonstrating a grapple. They seemed to recommend storing the grapple hoses by plugging them into one another. "To keep the them clean" . Is that best practice? Not sure I have seen that before...seems like a good idea? But I am very new to this stuff and don't know for sure.
 

mcfarmall

Well-known member

Equipment
Kubota M5660SUHD, Farmall C
Sep 11, 2013
1,411
1,691
113
Kalamazoo, MI
There is nothing wrong with doing that. I
20210404_162437.jpg
plug these into my grapple hoses so I can bleed off any pressure that builds due to temperature changes
 
  • Like
Reactions: 1 user

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
I plug mine into each other when the grapple is off the tractor. Easiest way to keep them clean.
 
  • Like
Reactions: 1 users

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,224
6,394
113
Sandpoint, ID
I watched a short youtube video (Link Here) from a company who shall not be named (rhymes with beer) that was demonstrating a grapple. They seemed to recommend storing the grapple hoses by plugging them into one another. "To keep the them clean" . Is that best practice? Not sure I have seen that before...seems like a good idea? But I am very new to this stuff and don't know for sure.
I do it on all of my implements, works perfectly!
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,428
4,910
113
Greensville,Ontario,Canada
It's 'standard operating procedure' to connect snowplow angling hoses when not on the JEEP for the past 5 decades.....
 

Geezer3d

Active member

Equipment
Kubota LX2610SU
Apr 22, 2021
203
197
43
Heart of the Catskills
Last fall when I switched from my grapple to my snow plow I connected the grapple hoses to each other. My thought was to keep the ends clean. It was on a cold day.

This spring when I switched back from snow plow to grapple I had a hard time reconnecting the grapple to the tractor. It was a warm day. My assumption is that the fluid expended a bit from cold to warm and left a little pressure in the grapple lines. I relieved the pressure by letting a little fluid out and it plugged right in.

I suppose the same thing could happen if the hoses were not plugged into each other.