Time for a fun thread. No politics. Just examples how we leaned things as kids back then...and survived...LOL
I posted a couple past childhood experiences in another thread, copied them here rather than retype, and added a couple others:
Just remembered something from when I was a kid. We had a metal can, probably would hold about a gallon of liquid, and was the shape of a normal cylinder. It had about an inch of gas in the bottom. We kept being impressed, because we could throw burning bits of sticks into the gas at the bottom of the can, and the gas would put out the burning embers and never catch fire.
AND we were close, looking into the can as we did it!
Thinking back on this, all I can say is WOW!
And:
You know, I just remembered another one. Amazes me perhaps even more.
I am not sure why we had hydrochloric acid and sulfuric acid as kids.
But we did. AND we did not have any flasks. BUT we did have some incandescent light bulbs. Solution? Break open the bulb from the bottom, and open it up, after pulling the filament out, who hoo, a pseudo flask appeared.
AND we naturally poured the water into the acid, backwards from the recommended practice, and watched it bubble in our homemade "flask". Why, thinking back, I have no idea the reason we did this...fortunately no lifelong disfigurements.
Then there was the homemade table saw we made. Worked fine until my friend almost cut his thumb off. Big cut, lots of blood. Parents seemed to think that was what kids did...nothing came of it otherwise...
How life changes over sixty years!
Now for a couple others:
Not sure how in the age of no computers, no internet, no easily finding out anything...but we somehow discovered we could make black powder, if we mixed saltpeter, sulfur and charcoal in certain proportions. AND saltpeter and sulfur was sold at the local pharmacy, if you asked the pharmacist for it. Behind the counter item, not on the shelf.
We also found that we had large ball bearings, that just slipped into 1/2 inch copper tubing, with a bit of a push. And at this time they sold toy guns, which used rolls of "caps" to make a bang sound when the toy gun hammer struck them. I think the caps were just dots of some kind of flash powder that was carried on a paper tape roll.
Anyway, being inventive kids of the 12 to 15 age bracket, we decided that if we made black powder, bent one end of the copper tubing over to close it pretty much, and stuffed the tubing with our black powder and a number of those caps cut away from their paper carrier, followed by a ball bearing and a slight closing the tubing end to hold the bearing in place...if we then put the tubing on a rock, and dropped a larger rock down on it, the caps inside would ignite and the black powder we made would explode, and the ball bearing would shoot out the end with considerable velocity. Enough to puncture some sheet metal we had...
Hard for me to equate those days to today when the kids sit at their iPads or computer screens most of the time. All good fun back then....LOL
Wait...there was also a thrift store that had a barrel full of 303 caliber rifles...no problem as a kid buying one. And ammo was available elsewhere...also no problem buying it as a kid...
We learned when you cut the barrel short, you get at lest 12 inches of flame coming out when you shoot the rifle...
So many "good" memories...glad to still be here today!
How about you?
I posted a couple past childhood experiences in another thread, copied them here rather than retype, and added a couple others:
Just remembered something from when I was a kid. We had a metal can, probably would hold about a gallon of liquid, and was the shape of a normal cylinder. It had about an inch of gas in the bottom. We kept being impressed, because we could throw burning bits of sticks into the gas at the bottom of the can, and the gas would put out the burning embers and never catch fire.
AND we were close, looking into the can as we did it!
Thinking back on this, all I can say is WOW!
And:
You know, I just remembered another one. Amazes me perhaps even more.
I am not sure why we had hydrochloric acid and sulfuric acid as kids.
But we did. AND we did not have any flasks. BUT we did have some incandescent light bulbs. Solution? Break open the bulb from the bottom, and open it up, after pulling the filament out, who hoo, a pseudo flask appeared.
AND we naturally poured the water into the acid, backwards from the recommended practice, and watched it bubble in our homemade "flask". Why, thinking back, I have no idea the reason we did this...fortunately no lifelong disfigurements.
Then there was the homemade table saw we made. Worked fine until my friend almost cut his thumb off. Big cut, lots of blood. Parents seemed to think that was what kids did...nothing came of it otherwise...
How life changes over sixty years!
Now for a couple others:
Not sure how in the age of no computers, no internet, no easily finding out anything...but we somehow discovered we could make black powder, if we mixed saltpeter, sulfur and charcoal in certain proportions. AND saltpeter and sulfur was sold at the local pharmacy, if you asked the pharmacist for it. Behind the counter item, not on the shelf.
We also found that we had large ball bearings, that just slipped into 1/2 inch copper tubing, with a bit of a push. And at this time they sold toy guns, which used rolls of "caps" to make a bang sound when the toy gun hammer struck them. I think the caps were just dots of some kind of flash powder that was carried on a paper tape roll.
Anyway, being inventive kids of the 12 to 15 age bracket, we decided that if we made black powder, bent one end of the copper tubing over to close it pretty much, and stuffed the tubing with our black powder and a number of those caps cut away from their paper carrier, followed by a ball bearing and a slight closing the tubing end to hold the bearing in place...if we then put the tubing on a rock, and dropped a larger rock down on it, the caps inside would ignite and the black powder we made would explode, and the ball bearing would shoot out the end with considerable velocity. Enough to puncture some sheet metal we had...
Hard for me to equate those days to today when the kids sit at their iPads or computer screens most of the time. All good fun back then....LOL
Wait...there was also a thrift store that had a barrel full of 303 caliber rifles...no problem as a kid buying one. And ammo was available elsewhere...also no problem buying it as a kid...
We learned when you cut the barrel short, you get at lest 12 inches of flame coming out when you shoot the rifle...
So many "good" memories...glad to still be here today!
How about you?