Bent hydraulic top link.

N

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
I thought I would try a hydraulic top link on my L2501. I bought one listed as a Category 1 top link. I hooked it up to my box blade and cycled the cylinder and it immediately bent as I extended it.

Are these things that weak or is there something I should not have done?
 

Attachments

  • Like
Reactions: 1 user
R

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,145
5,218
113
Chenango County, NY
Ouch.....no clue, but it looks like something I would do....

Was this done just by extending the cylinder, and rocking the BB back? BB wasn't engaged in digging at the time?

Doesn't seem like that should happen.

Guys with T-n-T may be of help.
 
N

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
RCW said:
Ouch.....no clue, but it looks like something I would do....

Was this done just by extending the cylinder, and rocking the BB back? BB wasn't engaged in digging at the time?

Doesn't seem like that should happen.

Guys with T-n-T may be of help.
Click to expand...

The tractor was parked and I had just hooked up the top link to the tractor and extended it enough to hook into the box blade and was cycling it to get the air out of the lines. I lifted the box blade off the ground and extended the cylinder out and it bent.
 
  • Wow
Reactions: 1 user
R

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,145
5,218
113
Chenango County, NY
Nicfin36 said:
The tractor was parked and I had just hooked up the top link to the tractor and extended it enough to hook into the box blade and was cycling it to get the air out of the lines. I lifted the box blade off the ground and extended the cylinder out and it bent.
Click to expand...

The BB was lifted when it bent?!?!?!

Is the rod made from baloney?!?!?!

Holy smokes....no experience with T-n-T, but lots with hydraulic cylinders.....something doesn't seem right.
 
eserv

eserv

Well-known member

Equipment
BX24, A1000 Kubota Generator
May 27, 2009
2,140
139
63
Hardisty, Alberta
RCW said:
The BB was lifted when it bent?!?!?!

Is the rod made from baloney?!?!?!

Holy smokes....no experience with T-n-T, but lots with hydraulic cylinders.....something doesn't seem right.
Click to expand...
Lets have a picture of how the cylinder was attached. There is evidence on the right side above the pin that the it contacted something.
 
N

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
RCW said:
The BB was lifted when it bent?!?!?!

Is the rod made from baloney?!?!?!

Holy smokes....no experience with T-n-T, but lots with hydraulic cylinders.....something doesn't seem right.
Click to expand...

Yeah, I lifted the box blade in the air, cycled it out, and as I was cycling the cylinder back in, I noticed it had bent.

OK, I just wanted to confirm I wasn't crazy in my thinking. I realize that the cylinder would be weaker extended out, but NEVER intended to actually use it extended like that.
 
N

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
eserv said:
Lets have a picture of how the cylinder was attached. There is evidence on the right side above the pin that the it contacted something.
Click to expand...
Yes, you are correct. I just looked at the brace on the box blade where it is welded up near the top link hole on the box blade, and it did contact the cylinder where the paint is gone. Perhaps, it created some sort of extra leverage? Not sure.
 
Henro

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,781
2,965
113
North of Pittsburgh PA
eserv said:
Lets have a picture of how the cylinder was attached. There is evidence on the right side above the pin that the it contacted something.
Click to expand...
I‘m with Everv. Although I don’t see the evidence.

Having trouble seeing how a box bade hanging in the air off the 3PH arms could cause this. Almost like the cylinder was hitting something, as it’s angle changed.

edit, I guess I think and type slow...😂
 
N

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
OK, I hooked the top link back onto the box blade. I guess when I extended the cylinder out, it contacted the bracing on the box blade and there was enough upwards force on the cylinder rod to bend it. That is my guess anyway. If so, my mistake. Live and learn.
 

Attachments

MOOTS

MOOTS

Well-known member
Lifetime Member

Equipment
MX6000
Jun 27, 2019
1,923
2,208
113
Canton, Georgia
Nicfin36 said:
OK, I hooked the top link back onto the box blade. I guess when I extended the cylinder out, it contacted the bracing on the box blade and there was enough upwards force on the cylinder rod to bend it. That is my guess anyway. If so, my mistake. Live and learn.
Click to expand...
There ya go. Does it still work, in and out? I’d keep using it till a problem showed itself.

Or a hydraulic shop may be able to straighten that and internally limit the throw a bit.
 
N

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
Matt Ellerbee said:
There ya go. Does it still work, in and out? I’d keep using it till a problem showed itself.

Or a hydraulic shop may be able to straighten that and internally limit the throw a bit.
Click to expand...
It still works. I am not sure how long it would last like that.
 
N

nota4re

Active member
Premium Member

Equipment
Case 580M Turbo; Kioti DK4210SE-CH; Kubota L2501 (Traded-in)
Aug 16, 2019
128
45
28
Newhall, CA
eserv

eserv

Well-known member

Equipment
BX24, A1000 Kubota Generator
May 27, 2009
2,140
139
63
Hardisty, Alberta
N

Nicfin36

Well-known member

Equipment
L2501 HST, BH77 Backhoe, SSQA Loader ZD1011 Mower
Jun 19, 2019
1,016
466
83
Decatur, AL
nota4re said:
I'm almost certain that you purchased the wrong top link as well. You got the 6004 which has 11" of travel and I think you really want the 6003 with 8" of travel. Here's a link to the 6003: https://www.surpluscenter.com/Hydra...ing-Top-Link-Cylinder-AMA-06003-9-7682-08.axd

The good news is that the 6003 is also a little less expensive.
Click to expand...

Welllll, I'm gonna confess. I actually bought the 6003 first and then thought the 6004 was the one I needed and ordered it. I was gonna send the first one back. My reasoning was the body of the top link on the 6004 was longer and I would not have to extend it out as far as the 6003. But, I did that test extension, which I would normally never do using it for work and caused the situation. The way the box blade was made with the brace so close to the pin hole did not help matters either. It looks like I will use the other one now. And, perhaps others can learn from my mistake. :LOL:
 
MOOTS

MOOTS

Well-known member
Lifetime Member

Equipment
MX6000
Jun 27, 2019
1,923
2,208
113
Canton, Georgia
Nicfin36 said:
That's not a bad idea!
Click to expand...
Was thinking about this some more, I would flip and straighten best you could. Then put that cylinder on a blade or landscape rake or something that isn’t used a whole bunch, but would still be nice to have hydraulic angle/movement.
 
  • Like
Reactions: 1 user
You must log in or register to reply here.

Top Bottom