rear remotes on Grand L6060HSTC

[Dennis.D]

Does any one have a picture of the rear remotes on a grand L6060 cab tractor? I am looking to add 2 remotes for top and tilt. Its about $2200 at dealer. I do a lot of mechanic work, but have no experience with hydraulics. If its a kit with instructions I'm sure I can put it all together. Looks like its very tight working in that area (I have the back hoe attachment) so I assume 1/2 the estimate is labor.
Thanks for any help there is not much information on internet or anywhere else I have looked for this model tractor.

 

[SDT]

Does any one have a picture of the rear remotes on a grand L6060 cab tractor? I am looking to add 2 remotes for top and tilt. Its about $2200 at dealer. I do a lot of mechanic work, but have no experience with hydraulics. If its a kit with instructions I'm sure I can put it all together. Looks like its very tight working in that area (I have the back hoe attachment) so I assume 1/2 the estimate is labor.
Thanks for any help there is not much information on internet or anywhere else I have looked for this model tractor.

I have three remotes on my GL6060 ROPS. Sorry, no photos.

Kubota kits do include installation instructions. Installation is straightforward but time consuming.

Cab is more time consuming and BH more time consuming yet.

SDT

 

[SidecarFlip]

Had a 5030 HSTC cab years ago and it is tight but doable.

 

[jajiu]

I have a 3560 that I had 2 extra remotes installed with the one I had and the dealer told me that 3 was my max. Here is what it looks like.

 

[Dennis.D]

I have a 3560 that I had 2 extra remotes installed with the one I had and the dealer told me that 3 was my max. Here is what it looks like.

jajiu,

Do you have enough room for the top and tilt cylinders with a the back hoe brackets?

 

[jajiu]

I only have the top link, but I'm sure there is room for the tilt. I got mine from Fit Right Hydraulics, check with him I'm sure he has done one or two in his time.

 

[tstae]

I added two remotes to my Grand L 4760 with cab. Just need to remove the back wheel and that will get you access. The instructions that came with the kits were very good.
I got my kits from Messicks.

 

[MtnViewRanch]

My understanding is that the Kubota T&T set will not work with the back hoe sub frame. The way that I build the Fit Rite units, there are no clearance issues and yes I have provided several T&T sets for L6060s with back hoes.