Fish Lifes B6100 Restoration
- Thread starter FishLife
- Start date
I looked at that site and found a plug that I think will work. My plug is a nine pin plug but it only uses 8 of them. This one should work. I think Im going to get it along with some of the connectors. Thank you so much.
Attachments
Last edited:
Fish, make sure the FEMALE new push-on connectors are made from a decent gauge of brass. I have bought some that were so thin they got loose and then you get a bad connection.
Finally starting to see an end in sight. I have been looking at this as two stages. Getting the chassis to a running condition is stage one. The tins, seat, and wheels are stage two. Everything for the chassis has been painted or powdered and bolted back on with the exception of the air cleaner and three point hitch. I still have to plate the mounting hardware for them which I plan on doing tomorrow. After that, mount the fuel tank and take care of the wiring. Then fill with fluids and it will be usable while I work on the rest.
Attachments
http://www.aliexpress.com/item/5-se...le-socket-plug-for-Motorcycle/1973567110.html
that close enough to original?
that close enough to original?
Did you see the 23 day "Slow Boat from CHINA" shipping time? And that's if you get it at all. Nice connector!
I found out that they are called a 6.3mm 9p connector. Typed that in to google and found them everywhere. Thanks for everybodys help on this one.
Attachments
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Any of those would work fine. I was just trying to keep it as close to OEM as possibly.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Watching folks post on some facebook groups blowing snow with there compacts with cabs. Looks like fun but im sure by this time of year it starts to get a little old.I hear ya, my B7100 is under 5 feet of snow, so I couldn't measure them.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I only wish I had a cab, I use the L3450 with either a rear blade or blower and loader to move snow, or if it's a lot, like it's been lately, I use the bobcat, it plows right through 3 feet of snow.
And yes dealing with the snow for the winters we have, does get a bit old!
Last edited:
torch
Well-known member
Equipment
B7100HSD, B2789, B2550, B4672, 48" cultivator, homemade FEL and Cab
My eager anticipation that March heralds the spring thaw is tempered only by the specter of the associated Muddy Driveway Season. And the Blackfly Season that follows.
Yay spring.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
torch
Well-known member
Equipment
B7100HSD, B2789, B2550, B4672, 48" cultivator, homemade FEL and Cab
Yeah. That.
Sometimes I think bears have the right idea: just go have a nap until it's all over.
<sigh>
Sometimes I think bears have the right idea: just go have a nap until it's all over.
<sigh>
Newlyme
Active member
Lifetime Member
Equipment
M4900 w/loader, finish mower, tiller, auger, rake. BX24 w/loader, backhoe
NIW, Thanks for the pics, (and the laugh). The Mrs and I enjoyed them. As for the laughs, its with you not aimed at you, we TOTALLY understand. She says that we have five seasons with a repeat of one, Fall, Mud, Winter, Mud, Spring and Summer.
Well I probably made life more difficult for me trying to source all the electrical connections to keep close to as original as possible. Probably should have just gone to the hardware store and just got off the shelf parts. Everything is trickling in slowly. Just waiting on a few terminals that should be here Tuesday if USPS expected date holds true. Coming along nicely though.
Attachments
Got a big surprise from USPS. My terminals showed up early. Got all the wiring done with the exception of the fuse holders. Those a pretty basic and Radio Shack has them so I will pick that up tomorrow.
