strange Kubota tiller

bahmi

New member
Aug 18, 2010
28
0
0
willington, conn. usa
I saw a Kubota tiller recently that was strange. As you look at it from the PTO side, on the left side you see a steel wheel,looks like a steering wheel, and I can't imagine what that wheel would be doing on the tiller. There were 2 rather large steel wheels on the machine, one on each side, about 12-14" in diameter. Steel and ruggedly made. It was a 3 pt hitch machine.

A decal said it was Kubota, but who knows who could have made such a machine?
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,200
6,712
113
Vilonia, Arkansas
I'm thinking the wheel what looks like a steering wheel actually controls the depth of the back wheels. It would be great if you could get a picture of the tiller so we could see what your talking about :D
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,552
6,602
113
Sandpoint, ID
Maybe something like this?


With one of these?
 

bahmi

New member
Aug 18, 2010
28
0
0
willington, conn. usa
First of all, the steel wheels are NOT behind the unit. They are on the front side, facing the tractor. As you look at the tiller from the tractor side, you see these steel wheels left and right and you see the (likely) depth adjusting wheel. There is NOTHING on the back except the metal flap that can be raised or lowered. Did Kubota make their own tillers? I'd say this machine is at least 30 years old.
The owner wants a grand for it and it needs all new tines. I'd call that highway robbery. You aren't replacing parts on this unit because they are likely unavailable. It does look kinda kinky, I'll say that much.
 

bahmi

New member
Aug 18, 2010
28
0
0
willington, conn. usa
It is not a rice paddy tiller. It has the wheel on the left side of the tiller facing the tractor, and 2 steel wheels before the tine shaft housing. It's ungainly looking, to say the least. I know I've seen this machine before, perhaps a few years ago on the Internet. In person, no, never seen such a critter.