I have read where several of you'll have the right side fender handle on you L3200 & 3800s does anyone know the part number? Also is there one available for the L3400-3700 series tractors? Thanks
Right fender handle
- Thread starter Sammy3700
- Start date
Im curious as well..Let me know if you find the part number for the right side fender handle for the L3800
According to a post on TractorByNet forum the L3240 right fender handle fits the L3200/L3800..Part number is T1060-29450.. Anyone buy one?
Last edited:
That part number is outdated but the new part number is T1060-29470. I just bought this for my L3901 and it fit perfectly. I also got the 2 nuts which hold the handle on, part 02771-50100. Total with shipping was $52.70
http://www.goldeneagledirect.com/index.php?l=product_detail&p=974291
Great pics!..Where did you get that handle from?..You had to drill out one of the holes? On my L3800DT they are already predrilled..Just tape coving the holes..
I installed mine yesterday, they should of just put both holes in the fender since they left one...
I got the handle from my dealer. And yes, the fender only came with one hole predrilled.
Huh interesting about the predrilled hole...How much did that grip cost you? Come with the hardware?
The handle and nuts are sold seperately. Here are the Kubota part numbers:
The hand grab is: # T1060-29450
The nuts are: # 02771-50100
I dont recall what I paid to be quite honest, but as I recall it was about the same as Messicks Online:
http://www.messicks.com/partsearch.aspx?pn=T1060-29450&ven=KU
http://www.messicks.com/partsearch.aspx?pn=02771-50100&ven=KU
I give $39.99 for my handle and did not ask on the two nuts ?? A different semi local had it in stock so we just took a little country-roads road trip to fetch it Friday while we were off work.
NS kubota
New member
Equipment
Kubota MX4800, Norse 350 logging winch, Hla 2042 pallet forks, Woods BSS60
Just ordered the right hand grab handle for our L3901. I gave the dealer the t1060-29470 # to check on the cost of the handle and the # didn't work we tried the old # t1060-29450 and it came up, so for any Canadian members wanting this part use the t1060-29450 US and Canadian Kubota part #'s are not always the same just for future reference.
Just a update local dealer had the right handle and nuts 42.85 for the 3800 and the holes were predrilled. The nuts are metric thread and have what would look like a flat washer made on them. Wish they offered one for the L3700SU.
When I saw the pre drilled holes covered with orange stickers on my new L3800 I demanded that before delivery the grab handle be installed at no charge, and it was.
My L4701 had pre-drilled holes with plugs. The T1060-29450 has been replaced by 29470 based on vendor Coleman. I just received this and from a rough examination the screws will not fit the pre-drilled holes. I do not have time to pop the plugs but it looks like about holes are about 1/2" to far apart. The handle looks to be the same I plan when I get time to expand the holes 1/4". It will be several days or maybe a week before I can verify the size but just wanted to throw this out. My only concerned is that the handle must cover the holes I would not want holes visible around the handle. Sorry for the delay.
Burt
New member
Equipment
L3700SU, box blade, 6 foot rhino blade, 1 bottom plow, 3 point receiver hitch.
Sammy,
That tractor is way too clean!
P.S. I wish there was a handle for the left side also.
Burt
Thanks I need to get a newer picture with the backhoe on it. It still looks good I try to keep it washed. 300hrs and I love it.