New profile posts

Now I’m moving to the next step. Problem #2 - Tractor runs, pumps hydraulic fluid because I forgot to reconnect a hose and nearly drowned in the stuff. All hydraulics now connected. Hydraulic oil topped up. Tractor running at med-high revs, can see pressure in hose from movement, but nothing moves. What are the lever/pedal positions to enable testing of boom & 4-in-1 bucket? I have workshop manual but have not been able to identify a solution.

Problem#3- rear wheels are off ground on jack stands. 2-4wd lever is in position A (2wd). Brake off, depress fwd pedal, instant stop!

Hopefully you guys have previously solved these problems before. Very Grateful for any hints/ solutions. - Cheers Q

Finally back on line. Thanks to Dusty &Co was able to get my BX25 started.

My B21 is still randomly stalling and usually will not restart right away. There is a single click sound when the key is turned to the start position and it starts everytime i hear that click ( relay or something ??) After it stalls that click sound is not heard and it just cranks over with no start. I usually Leave it sit for a few minutes and when I turn the key I again. I will hear the click and it fires up immediately. Does anyone have any ideas what is happening ?

Evil Twin, I thought you would think this as a good omen for Biker1mike. I ordered a Honda Goldwing tourer. Yes, a Barcaliner for old folks. 0 to 130 in no time, but then again I am in my later 60's. Anyways, my new ride is VIN number 00001. The dealer has never had a machine with the first production release. The Blue Ridge will be on the list on my way south to see the brother in NC . I was never a knee dragger but I sure do respect those that can do it !!! I tried it at 2 AM on a Honda VT100 and scared the shi* out of me before the track security folks told us to go back to our tents (West Va). You know the track for sure. Mike

I have a new Kubota U35-4. How do you engage or activate the "Float Blade" feature??
Thanks!!

gr2707, did Dragontea send you the manual? I need as well, if he sent you a copy. I've messaged him and no reply of yet. Thanks if you can send

I am new here just seeing what it’s all about and if I can help you as you could help me

Still Alive.......maybe?

I have an L3301 that after 8 years needs a battery. What is an acceptable battery for this assuming I am not going use OEM type. Need proper fit and correct terminal type and location.

does the kubota d1105 engine fit in the Kubota l245dt? It comes with the d1101 from the factory. What are the differences between the two engines?

Is the 245 DT loader interchangeable with kubota l185?

This is a kubota L3010 1999 model

1G702-51010 Kubota PUMP,INJECTION,ASSY
L3830 HST Pumping out of 1 injector. Let the air out, loosened the injectors but no fuel out. Two injectors bad?

looking of video on install block heater on '97 L2900???

Bent my dipper arm & piston on bh75 backhoe, can I replace with a bh77 arm and piston?

I just got a wonderful B7800 in July and I also found a good used 72” Woods rear discharge finish mower. It’s great and might be a little bit easier to maneuver since I have my loader up front. I compensate for the loader by simply backing up instead of trying to turn and with the HST and the rear pedal, it works our well.

Looking for a kit for a M5040 of 2 lift arms, 1 adjustable leveling arm, 1 stabilizer bar, 2 stabilizer chain assemblies, 1 adjustable top link, 2 leveling arm brackets, non-Kubota to save some $$$$$ if possible. I bought a M5040 with a backhoe, so missing the 3point hitch parts.

Interested in the bucket seal kits you had

How to find a 12V access on a BX2380 with Switch on?

Retired O/O Truck Driver.
ZD21 Great Mower.
Just Purchased
L 3000 dt