OK everyone My problem is finally solved, it turns out that the quick coupler was bad on the line that supplies the tilt cylinders, didn't even know they could go bad other than just start leaking. I guess you can still learn things even at my age. God bless all you folks, and a very big thanks for your help.
Did you ever figure this out? I too am having same symptoms you described and found relay behind turn signal is buzzing with key turned to start. stays buzzing until I disconnect battery to "reset"...
I'm new here. By chance do you still have the tail light upgrades for the L3130? If so, Is the black plastic surround included? My right shroud is cracked and a piece missing. The light is fine.
Seeking advice: Kubota M4900 --- everything working fine EXCEPT the headlights, tail lights and hazard flasher lights. Checked the fuses under the steering wheel and all are ok.....where do we go from here?
Hi Dave
I posted about a Starting problem I have. I wonder if you have any ideas. Also, do you have a link where I can get a Maintenance Manual for my Kubota BX23s tractor? I'm happy to pay for it.
Aloha, Olbuck75
I am also considering Giant Thujas as a privacy fence. Can you tell me how tall are the ones you planted? I am looking at 5-6 footers but was going to wait until next month to plant them.
Do you know how resistant they are to deer? In out old house they are the bottom 6' of the Arborvitaes
hey guys! i have a l5030 runs starts great but will not pull in any high gear had it in 1st and 4x4 trying mow wouldnt hardly pull in simi hi weeds and pto barly turned any ideas and thanks
I'm writing in a private conversation - because I don't understand what you have posted about your L355ss. Did the problem start when the new clutch was installed?
I had one of these (it still lives next door at my neighbor's) and I've had two L345's that are very similar except they don't have the hydraulic shuttle. I've put new clutches in both models.
With engine running and shifter in a gear, does moving the shuttle lever (on the dash) engage the wheels to move the the tractor? How long does it take to engage?
Does the rear 3-point hitch move up and down ok? Is there a loader? Does it seem to work normally?
HEllo Dennis. I have almost the identical issue happening with my M7060. It engages with switch no problem, but most times it will stay engaged when I disengage switch. I console says it is off but still in on and under power. Did you ever find out what the issue was? I sure would like to resolve the issue without getting hammered by the dealer repair. Thanks so much.
HEllo Dennis. I have almost the identical issue happening with my M7060. It engages with switch no problem, but most times it will stay engaged when I disengage switch. I console says it is off but still in on and under power. Did you ever find out what the issue was? I sure would like to resolve the issue without getting hammered by the dealer repair. Thanks so much.
I saw your post about the Lewis 200 backhoe. I am currently restoring one. But I can’t see any evidence of bushes even though the parts manual lists them.
I am wondering has someone put larger pins in to do away with the bushes. From your memory were the pins all mostly 1” pins?
I replaced Head and head gasket on my D902 when pouring antifreeze in radiator it started coming out of valve cover , did I do something wrong? Apparently. Lol
The house we bought has a 500gal underground tank. The prev owner n I bought it from the lp company do now I can buy gas anywhere. They were getting their lp from All Gas @ $3.26 / gal
btw I am going to take down 5-10 pines abt 30' tall. Any interest? Otherwise I'm just going to dump them in the woods.