New profile posts

Test

Hi EVEL (A Bike Guy, right??) You said " Oh, BTW, me thinks that was Sean Diddy Combs you quoted "
Jeezum Crow (A Vermontism) you must be a LOT younger than me, quoting guys that are still in Jail...
Regards, Terry

Greetings all,
New member, new 2380 with LP Grapple....3 hrs in, the jaws stopped opening/closing, everything else fine. looked and saw 4 wires sticking out below the joystick button....they must have been jerked out, tho not real sure how it happened.

I can see where 2 of the wire go in a quik connect, but cannot see where the other 2 wires were connected....need a diagram, manual not present, cannot find diagram online...anybody seen this or that wiring diagram for grapple?


i'm offically bleeding orange now!

cheers!

Welcome Brother

Alan
To send you a manual I need your email address
What model is your machine as I only have a limited number of models
My offer to you is this as it has been to all others looking for WSM's.
Send me your email address

I will sent to your email address a Jumpshare link to download the WSM.
Once you have it downloaded, if you agree it is as stated, you will agree to upgrade your forum membership to any of the paying ones.
These funds help keep the forum up for everyone's benefit. Nothing comes to me!!!
If you do not see the link in your email IN box check your JUNK folder.
If you are having tough times financially, tell me and I will make an exception

Dave

I just got a 2005 Kubota BX1500, 1 day ago. It ran great. I love the tractor. Today it will not start, no power or lights, everything is dead. The battery and fuses are okay. Does anyone know what the problem is? Thanks

We are looking for the bucket tilt lever for our L285 tractor. Ours is bent and cracked, I'm afraid if we try to straighten it it will break.

I would be interested and figure out something for shipping/getting if they are the correct size?

Not sure if I'm posting this right. I have a kubota l2800. It's a hst. I was bushhoging a few weeks ago and thought I hit a stump on my hst filter because it's was leaking lol. I got new filter from dealer and it is leaking in same way. It's like it's pushing the seal out of the filter. So I bought a new filter mount and put it on. It ran fine for about 20 minutes and the seal blew out again. I've searched the web for a similar problem but can't find anything. Would love some info if anyone can help. Thanks

Eric
I have a library of WSM's including the one for your machine.

Re WSM
My offer to you is this as it has been to all others looking for WSM's.
Send me your email address

I will sent to your email address a Jumpshare link to download the L3901 WSM.
Once you have it downloaded, if you agree it is as stated, you will agree to upgrade your forum membership to any of the paying ones.
These funds help keep the forum up for everyone's benefit. Nothing comes to me!!!
If you do not see the link in your email IN box check your JUNK folder.
If you are having tough times financially, tell me and I will make an exception

Dave

issue with my 3 Point Hitch. With a load on it it will not pick up. With no attachment it does. The main difference in this thread is I do not have a Front end loader it is just a tractor. Any suggestions?

What's new with you Good Sir?
The ballast box is great. I've used it for a tool carrier more than a counterbalance so far.
I've been cleaning up some of the junk from my parking area. I had a 5' belly mower that I had stripped of parts. I have another 5' belly mower that is complete but needs a new oil seal on the bottom of the gearbox main shaft. I have the seal, just not installed.
I upgraded to a 6' mower when I took the 5' deck off to change the oil seal!!!!! LOL It is amazing how much more ground I can cover with that 6' deck. The gauge wheels (on all four corners) make it easier to get the max width when mowing.
Thanks again for the ballast box. I made a stand to set it on and it's a "peach".
Ye Ole Caterpillar Cowboy

Hello TKDavison,
Today I noticed a steady leak from my BX23s that seems to be similar or the same as what you had posted about back in 2020. As soon as the tractor is started, hydraulic fluid is pouring out from that same area. But the post does not say what the problem and solution ended up to be. Can you give me any information on what your issue turned out to be and how it was fixed?
Thanks for any help!

Post some photos of the top of your battery and also where the ground cable connects to the frame
Dave

2012 M6040. Im having issues with it stalling and it seems to be getting air in the injector. It all started when the 1/4" return fuel line popped off going back into the fuel tank. I put it back on. I didnt run it out of fuel or nothing. It would stall and starve for fuel at 2000 RPM and eventually die. I drained the fuel separator and have changed the fuel filter twice. I sucked the fuel out and then changed the fuel filter the 2nd time. I notice the fuel in the water separator cup gets about half way down at times. I have had to bleed the injector to get it back going. I did confirm that my O-ring was on my separator. Got any suggestions?

Hey Y'all! I followed your advise and passed on the BX2200 with high hours.
I found a BX2360 with 620 hrs for the right price and I am so happy!
It is such a delight to use.
I know this is just the beginning of my BX journey and can't wait to learn more!
Again, 'Thank You to everyone who took the time to help!'

B7610 won't start. Move gas pedal it starts. , sometimes. Now , it will not start.

2010 RTV 900, 2024 422KWT 60

Grumpy Old Man!

Hey Ron,

I see you have a b8200. Wonder if I can ask you a question?


I just picked one up about 2 weeks ago, I'm loving it so far- been doing some grading, moving materials, moving with pto mower, working great, only got like 450 hrs on it.


I can't get it into the highest or maybe the lowest range.


The range selector is hitting something. I posted pics here:


https://www.orangetractortalks.com/forums/threads/issue-with-range-shift-on-b8200.69846/#post-731765


Just curious what the range selector lever looks like on yours and if those two levers are connected?

Thanks in advance man,


Sean