New profile posts

What's new New posts New media New media comments New profile posts Latest activity
R
I don't use this forum much so don't know how to tell you that I fixed my LA181 bucket problem this morning. Thank you for reaching out to me. It was a very tiny cotter pin that had broken and the joystick clamp fell off the lever to the bucket that allowed me to curl and uncurl. I am so excited that I am boing out to work with my tractor today. Yeah!!!!
007kubotaguy
Hello.i have a good used cover for your Kubota. You can reach me at 209 -712-4066.
I am in central California.
Thank you Lance Newhall
L
Hello Hkb82.
I'd like to thank you for your response to Northwoods regarding his negative comments. I should've known you were a Canadian, even better in Ontario, since that's where I am too. I found his, and a few others', pretty discouraging. I'll be posting an update with more info later today if you're interested.
865KubotaChris
Hi Torch! North Idaho Wolfman said you are the person to see about getting my hands on a hydraulic block diverter for a B 6100. Is that something I can buy from you possibly? I would like to add a hydraulic top link to my little tractor… thanks so much for the help!
H
Hello,

I stumbled across a post you replied to about a Kubota 8540 clutch pack. I see you replaced a lot of them, so I am wondering if you had any experience with the m120 clutch packs. Right now, I am in the process of splitting it but I'm not sure what to use to split it yet or what really I'm getting myself into so any information would be appreciated.
L
lugbolt
No, I never did anything larger than the 9540. Shop wasn't big enough. Little tiny mom-and-pop dealership at the time. Sorry, I wish I could be of more help.
W
Quick question on the Cat 1, Euro hooks.

I have all my equipment set up with 7/8" lower link pins (each runs between U bracket).

If I converted my set up to the Cat 1 Euro hooks, is this all I need? I don't want to get into any type of additional plates, flanges, etc.

Thanks a million for your time and help!!
Wendol
MtnViewRanch
MtnViewRanch
Typically you would have a set of implement balls (2 balls would be 1 set) that would stay on those 7/8" pins with each implement.

The balls are the only additional item required. The big advantage of the Euro hooks over say the Pat's QH system is that the Euro-type connection allows for full articulation and therefore does not wear out with heavy use as the Pat's system seems too with heavy duty usage.
W
wendol
Thanks for the quick response.
D
Looking for a winter front for a Kubota L 3940 w/ cab & loader
Thanks, Dave
bird dogger
bird dogger
Hi djlondgren, I don't have a pattern for your L3940 but I'd be willing to work one up with you and sew the covers.
I "started a conversation" with you as this message can only be short.

If you log into the OTT website and see this message....If you look in the upper right corner of the page, you'll see an icon of an "envelope".
Select that envelope and you should find my message with more info in it.

Another alternative: feel free to use my regular email address dbratager@midco.net

The "start a conversation" and regular email work a lot better. I'll wait to hear from you after you find that message above.

If you have trouble finding it....message me here again and we'll get it figured out. Anyway, I'd be happy to try to work up a set of covers for you.

David
H
B7001d Air Filter housing hose and hood. Hi. I‘ve purchased a new air filter housing but I need to find a hose to connect to the engine.. I’m also looking for a hood. Happy to pay carriage to UK. Many thanks
W
Hey there,

I just came across your post on the hydraulic cylinder replacements for the Woods BH 750. I have the same problem of having to replace mine, but at $900 a pop I was hoping to find a cheaper option.

Are you able to list out the exact parts you used to build new replacements with? I would really appreciate the help.

Kindest regards

Jacques
kubotasam
kubotasam
Sorry for the long delay. My wife has been in the hospital for 3 weeks now. I just have not had the time to be on my computer. Unfortunately I am not able to give you the list of parts. It was 5 or 6 years ago and I did not keep the records. luck with your Backhoe. Wish I could help.
D
Just bought a kubota l 1500 and love reading up on it. Will probably need help so lol .Cant wait to get it home. Runs great and looks ok. Needs some tlc The person kept in his big lake home . Talk to you all later
  • Like
Reactions: 1 user
N
Looking for some parts for front axle on a 4x4 b6000 looking for uj yoke or n s trumpet or complete a axle if anyone can help please
BBRE
I also have a Kubota b7100 4x4. It keeps burning through pilot bushings in the clutch. How do I get them to last? What am I doing wrong. Bushing is cheap but changing it takes a dozen hours. Help
BBRE
Just purchased a Zen noh zl 1511 fd, had a hydraulic line burst and changed it. Now low on fluid and won’t move. Where do I add fluid and how do I know when it is enough?
G
I can try to send you the WSM that has a GOOD clear wiring diagram. It's 28MB long
C
carlbach
Thanks I do have the WSM and a well used and highlighted copy of the wiring.
Q
Now I’m moving to the next step. Problem #2 - Tractor runs, pumps hydraulic fluid because I forgot to reconnect a hose and nearly drowned in the stuff. All hydraulics now connected. Hydraulic oil topped up. Tractor running at med-high revs, can see pressure in hose from movement, but nothing moves. What are the lever/pedal positions to enable testing of boom & 4-in-1 bucket? I have workshop manual but have not been able to identify a solution.

Problem#3- rear wheels are off ground on jack stands. 2-4wd lever is in position A (2wd). Brake off, depress fwd pedal, instant stop!

Hopefully you guys have previously solved these problems before. Very Grateful for any hints/ solutions. - Cheers Q
Top Bottom