I have 99 B7300 and I'm only receiving 800-900 lbs of pressure from High Pressure side of hydraulic block, (same at control Valve) would this be a flow dividing valve problem or a Hydraulic Suction Pump problem ?
New profile posts
hi we have a L3600 gst and are looking to buy a full sub frame to mount a front end loader , are your parts ok for this ? please advise , if so at what price ?, thanks james
Workshop manual from Kubota Books: (these two looked the same)
Also, the manual:
Also, the manual:
-
D
D2Cat wrote on RCW's profile.
Hey, don't let him (fried1765) bother you. It's like a train going by and making a rumbling noise that irritates you. It soon passes! This is basically Facebook for people who enjoy tractors/implements and some folks feel like they have to post even when it makes no sense or helps anyone, it makes them feel good. I appreciate your post, so don't let a poster or two discourage you.
-
G
GreensvilleJay wrote on ve9aa's profile.
Are you dug out yet ? Ready for the next Wonderful Winter White ??? I got 12" of WET, HEAVY white here the other day..it'll still be here when the rabbit brings his eggs.....
if you backdrag with blower tilted, you're on the cutting/scraper bar so no stress to the blower housing
stay warm but have fun....!
if you backdrag with blower tilted, you're on the cutting/scraper bar so no stress to the blower housing
stay warm but have fun....!
EA 55” Wicked Grapple: Ordered 21 December 2022 / Delivered 27 February 2023, less than 10 weeks and within the 12 week lead time on initial order.
Land Pride 3rd function junk?? Has anyone else had weather seal (corrosion) issues with their LP 3rd function solenoid? I previously installed Summit Hydraulics 3rd function (awesome) on old tractor, then bought a new L3901 with LP 3rd function already installed. After 18 months (garage stored) the LP is kaput !! LP uses poor quality electrical contacts that rusted right out...and of course you can't get any specs/details/replacement parts online. Also, LP wants $70 and 10+days for a $2 momentary switch. Anyone else have this problem?
replaced my fuel lines today as per a thread that discussed the same starving for fuel issue I was seeming to have
Hi all me again
Still having issues with my L4150 as before loss of power
This time i have replaced all the injectors with new one and had the fuel pump serviced, but alas it is no better infact probly worse.
After putting the pump and injectors back in place getting good fuel to all injectors jump start ( as it had been sitting for a while waiting for the pump and injectors) i can get it to run for about 10minutes then it fades to a stop ,turn the key and away it goes again for another 10 minutes before stopping again.
Is there something i have missed as this is starting to do my head in any help , suggestion would greatly appreciated
regards
Mr Fitz
Still having issues with my L4150 as before loss of power
This time i have replaced all the injectors with new one and had the fuel pump serviced, but alas it is no better infact probly worse.
After putting the pump and injectors back in place getting good fuel to all injectors jump start ( as it had been sitting for a while waiting for the pump and injectors) i can get it to run for about 10minutes then it fades to a stop ,turn the key and away it goes again for another 10 minutes before stopping again.
Is there something i have missed as this is starting to do my head in any help , suggestion would greatly appreciated
regards
Mr Fitz
Has anyone ever installed a Green Guard motorized chute blocker on their Zero turn? I am considering one but would like some guidance if available.
-
Z
ZOrg wrote on BobbyK's profile.
Hi, I saw your write up from 2018 on the hydraulic block installation. It was awesome as I just picked up a B7610 and want to add a loader. Exactly what I was looking for. Do you by any chance have any pics of where the return line connects to the tractor? Apparently, it's under the seat.
On a separate note, it's great to talk to someone from Canada. I live in the US now but used to live in Georgetown Ontario and did a lot of work with Poultry farmers years back in the London/Grand Bend area and Port Stanley. thanks
On a separate note, it's great to talk to someone from Canada. I live in the US now but used to live in Georgetown Ontario and did a lot of work with Poultry farmers years back in the London/Grand Bend area and Port Stanley. thanks
For Kubota B1610 , I am looking for parts to start with restoration project
start with set of left ad right fenders, and panels.
start with set of left ad right fenders, and panels.