New profile posts

Hi, haven't work on the issue that I'm having with the crank no start. If you come across something I will gladly appreciate the help, planning to start on Saturday.

Do you sell that wood and are you near Pittsburgh?

I was looking for snow removal solutions several years ago to match with Kubota B21. I'm pretty sure someone told me of a bucket insert with its own power supply and remote controls to the engine and chute. For The life of me I cannot find any information on a unit as I describe. Has anyone ever heard of something like this?

The yoke on tailwheel of my Land Pride 72" cutter broke. I suspected a bad weld of the spindle to the yoke, although after finding the trail of parts and then looking at (a photo when it was new compared to the diagarm in the manual) the bronze spacer bushing had been installed incorrectly by the dealer at the bottom of the spindle instead of the top and may have put too much torque on the spindle at the weld, resulting in failure. It was out of warranty by time (but only 12 hours or so of active mowing at the time), but I sent photos and explanation to the folks at Land Pride, and they sent out a brand new yoke, so Kudos on excellent customer service. Granted, I could have reinforced and rewelded the joint, but that wasn't the point I won't hesitate on getting another LP product in the future.

Check your thread about BH, no direct contact info allowed.

I'm in BR, used Ascension Eq last Nov. for L3560LE. Who are you using, Seal, M&L, Parish Tractor? On the way back from Mobile Sunday I saw a good number of tractors possibly LX3310 at Lee Tractor on I-10 Biloxi area: https://www.leetractor.net/ Also check Evergreen in Covington: https://www.evergreentractor.com/ Not sure but hey give it a shot, maybe your dealer ain't looking real hard.

Captmikem your instructions for resetting the codes on my tractor were described perfect. I cleared the codes and used it for about thirty minutes this afternoon without any warning lights or codes coming up. Not sure why they came on but hopefully everything is ok with it! Thanks for the information.

new M5400 owner

my Kubota M-490 has been giving me trouble in an electrical issue so i recently put a brand new OEM ignition key switch in it yesterday i was unloading items and it was parked emergency brake on also blocked and just sitting at an idle and it died ??? took a little bit but did start back up i have checked cables and the electrical plug in to the dash but it all looks good for some time i would have to tap on the fuel solenoid because it would stick when cold and also would have to hold key longer in the start mode to keep in running any ideas ??? or sugjestions on what to check or look for or test would be much appreciated

I have a b6100 that is making oil. It doesn’t smell like diesel. The oil is black and not milky. I’m thinking hydraulic oil. Any suggestions is appreciated.

Looking for Kubota BH92 backhoe attachment and sub-frame for L4701 tractor

just stumbled upon your post and the glow plug relay issue. I have a 2010 Grand L3940 Kubota and have a devil of a time starting it in cold weather. You mentioned that you ran a jumper wire from the battery directly to the glow plug connector for 10 seconds. Can you be more specific. Do I simply run a single wire from the positive battery terminal to the connector and hold it there for ten seconds. Then try and start the tractor? Wasn't sure if I needed to have the key switch on while connecting the jumper, etc.. I thought a circuit would need a ground connection as well. Just trying to confirm is this is my problem before pulling the dash, etc.. I've already checked the obvious, fuel filter, battery charged, etc.. thanks.

I am interested in a set of winter covers for my LX3310 can you contact me how to order them

Waiting for some snow to plow.

Did you find the fix for no spark. I’m having as early issue

Hi Dawson,

I'm interested in a grill guard -- what would be timing/cost/specs for an MX5800 guard?

Thanks,

Michael

Hello Superjet, I'm pretty close to you here in Michigan, near the St. Johns area. I'm looking to purchase a grapple for my MX5800 and would like to fit a good grill guard first. Reading from this forum, are you available to make one? If so, please let me know cost, timing and notable specs, as appropriate. Thank you, Michael

OK, I've gotta know. How did you post the degree symbol? I can't find it as an OTT tool. Lynn

MX5200, Wallenstein FX140, M6-111

Now have a Kubota B3000 with cab.