New profile posts

Also own Bobcat 743B and a John Deer 270 Skid Steer that I’m working on
T
TL Hutton
In need of a shop manual for the John Deer 270 Skid Steer if anyone has access to one
Hi Rob,

I saw your post about the Lewis 200 backhoe. I am currently restoring one. But I can’t see any evidence of bushes even though the parts manual lists them.

I am wondering has someone put larger pins in to do away with the bushes. From your memory were the pins all mostly 1” pins?

robert
I replaced Head and head gasket on my D902 when pouring antifreeze in radiator it started coming out of valve cover , did I do something wrong? Apparently. Lol
peewee618
peewee618
I don't understand why it would come out top of valve cover fast as I was pouring it in? Cracked block wouldn't cause a reaction that fast I don't think? Maybe I did something wrong on intake? My first attempt on this D902. 2017 model. I've done plenty on old gas burners ,. Any help would be great fully appreciated. Thank you
Good morning. It appears that the loader valve on my BX2350 has been leaking for some time. Yesterday I noticed this flood under the tractor and removed the valve to replace the obviously bad O Rings. When I removed the bolts from the housing, I realized I may have made a mistake. Are these to be put back in directionally or is there a specific torque to tighten them down? I'm talking about the bolts that have the flow holes in them for the fluid to pass through. I'm not sure what else to call them. Parts diagrams call them a joint bolt. Any advice would be greatly appreciated.
If your wife is mad at you, buy a tractor.
She will still be mad, but you will have
A new tractor 🚜
Almost 65 years old used to be an Aircraft Mechanic. We my wife & I bought a house in 2021in Illinois, have an acre to mow with rough terrain, slopes etc. then last year my wife became disabled suddenly. But that's life!
Looking for info. Kubota GR2100. Customer states power steering stops working when raising the deck. I haven't work on a GR before, not sure if this in not a normal condition.
My Kubota tractor L3000DT has a LB400A front loader, but the Husco control box does not have a model number on it and I need to replace it. Any help on Model or replacement unit with a better track record than the Husco.
I can get grasscatcher shipped for $320. I will have to crate. so make me an offer.
Gr 2100 4 weeks ago purchase. Excellent condition mechanically and cosmetic. Having a Intermittent Electrical starting Issue.
Every so often (After sitting) the starter won't engage. New Battery, New Battery Terminals. Today it happened again. So, I jumped the
solenoid and it engaged the starter and cranked then died. after checking fuses under the dash 15 Amp was blown. Replaced the Fuse. But, to no Avail.
Now, I have NO Electrical Power. Help !! Thank Ya'll
This object almost killed me when my wife was brush hogging. We had just cleared the old fence line and pulled tee posts and junk. My wife mowed the fence line and I moved off 50 ft. All of the sudden this object flew direct at my head from the side of the brush hog. I ducked and it hit the steel roll cage above me in the UTV and made a 1-2" dent. Tip speed on a brush hog is 15,000 ft/min and we don't think it was quite that fast. But it was powerful enough to have the energy of an AK47 or AR15. I would have been dead or worse. We found the short piece of pipe the previous owner had stuck in the ground, not a fence post just a 2 foot galv. pipe. And surprise we also found the cut off portion below. Stay well away from brush hogs...on all sides.
  • Like
Reactions: 1 user
I'm getting ready to replace the boom pin and bushings on my L35TLB. I'm wondering what the "collar, swing" is in the parts diagram. It goes between the bushings, apparently.
I'm trying to find where I can order hydraulic dust caps covers and plugs. Can someone out there help me?
cthomas
cthomas
amazon or summit
C
civlized
Tractor Supply normally has them in stock, also.
I would like to purchase a set of the tail lights that you have for sale for the L 4330 Kabota tractor please. I do not know how to go about doing this. I would certainly appreciate any help you could give me if you have any more for sale, thank you very much.
TECH101
TECH101
Call your local Kubota dealer give them model & serial number they can get you the parts