Hey guys, I'm fixing to buy a TG1860 diesel that hasn't run for a few years. is there a valve that I can open up to allow the wheels to freewheel so that I can push it up onto my trailer that has a ramp?
One more post was missing from a thread about a B670 BH parts list, but that thread has not been re-posted by the OP, so no place to re-post my answer.
Mr K,
Now I am having trouble trying to answer your inquiry- I keep getting a message "oops we ran into a problem, please post a message with less than 420 characters"
I serviced my L3940 and forgot to cut the fuel back on after changing the fuel filter. I started the tractor and it ran of course until it ran out of fuel, I cut the fuel back on it would turnover and attempt to start, but no cigar. I opened the cock on the fuel pump per the owners manual and cracked the fuel lines at the injectors to bleed off air, but still had no luck.
Any insights?
Thanks
Ed
So I drained the hyd fluid, cleaned filter, pulled the tractor apart installed new disc, clutch, and release bearing and it still will not go into gear while running. The clutch linkage is adjusted all the way out.
I have a troubleshooting question about my L1500DT. I'm having problems getting it into any gear once it warmed up. Going into gear not running is fine and I can start it in gear and will drive fine, cannot change gears.