New profile posts

The front half of the PTO shaft is stuck in our Kubota tractor's PTO --any ideas would be appreciated.

Hi Vic, I have broken the front axle housing on my zb5000. Would you have one or know where I might be able to find one? I have a guy welding it but because it is cast iron he tells me it won’t last. Would I be able to find on from a 7000 and make the switch or would that be a problem? There is a whole front assemble on eBay for the 7000 but not sure if the gearing would work? Any help would be appreciated thanks.

Hey Vic, I broke the pin on the drag link of my b1750 hst, I have a chance to get a used drag link from a b7200 hst p/n 67401-56400. It looks in the pic to be the same general shape. Are they basically interchangable, or am I going to buy a new part for my b1750? Thanks

pulled the head off my l245dt. new one ordered , hopefully this will take care of the antifreeze in the oil. pics in my profile.

Hi Vic. Can you take a look at my L245DT transmission post? I am in need of replacing the reverse shift fork and need to know what the process is.

How to remove front subframe BX2350?

It seems i remember someone posted a website where you could look up kubota parts. Also posted a parts house in canada that were cheaper. Im having trouble getting the chain and lower sprocket out of the side gearcase on a kubota fs850 tiller. I have the adjusting finger out but i cant get the other part out that goes through the side of the caseim assuming its a chain adjuster of some sort. Does anyone know of repair manuals online? Any help will be appreciated.

Hi, I have L1-455, some interesting problem tised up, battery sighn was flickering together with some sighn like oil level, there is sight on japanese only maybe somebody has user manual for instrument panel warning signals!

Just noticed he's on a bunch more as well. Don't you just wanna kick his a$$.
Thanks,
Dick

Vic, the escort guy is on another thread as well: 'Well the project is halfway and things are looking good'. Poster is ZYC123.
Dick

Hi Vic, the stupid new york escort chuckle heads are back. In the buying advise section under 50" reverse till hoe. Figured you would want to know. Thanks buddy. Hope everything is going your way.

I re-sent the request just now.

I know the owner was in Chicago last week for a class.....but I know he's back now......hope he can get 'round to this!! (grrrr)

hey, dave sorry for the late reply. if you could get the serial numbers/ model numbers for me that would be great! if you want to e-mail me the info when you get it, its mfsalafia@comcast.net thanks again for your time.

Dear Service Department Vic,

I wish to buy parts for my Kubota B6000 4wd.

I have the list of parts I require, subject to price and availability, as an Excel spreadsheet.

Do you have an E mail address I can mail the spreadsheet to?

Alternatively you can mail me at:

alan@tlcsiam.com

..and I will reply providing the spreadsheet as an attachment.

1. I wish to pay using my UK issued Visa card.

If that is not acceptable please let me know what methods are available.

2. Delivery would be to my address in Thailand which is where the tractor is.

Regards,

Alan Betts

Vic,
Could you shoot me a PM with a price for all of the decals I'll need when I repaint my B6000? It's a grey market 4WD job with the bolt-on tiller. Also let me know where to send the check, or if you prefer credit card.

Regards,

Hans

Tim sorry it took so long to get back to ya I just bought a piece of flat stock drilled and painted if you need any more info e-mail me @ bcbull378@aol.com and I can take a few more pics and measurments and send them your way I love the way the light work I have no problem working at night lots of light , take care buddy......Dan

Brilliant
Thank you very much.
Now to do the work!

hi vic,

i have a kubota mx5100 hydro. 4 wd. that i want to install 4 rear remotes on, would you please tell me what to get { dealer want to much} after market is fine.

thanks,
candyman

Vic
Thanks for the explanation of the Munroe hydraulic arm on my 1502M. Now for a very dumb question but ... if I remove the whole unit, how do I block off the hydraulic connectors i.e. do I need to put some sort of seal on the connectors in case the switch accidentally gets turned on or do they self seal? Thanks in anticipation. Ed

Tinker hows it going, I hope you had a grand new year and holidays with you and your family. I was wondering if you still had that PFD file you talked about sending me back in September,,, Im sure the big K would get silly about that, kinda like Harley does.
Yeah I know Im bad about getting things done sometimes, but with work and home and aged folks it gets a little crazy sometimes. Im sorry Im so late about getting back to you but better late than never, I guess, but I cant convince my boss of that,,lol.

So if you want to please send it to
skeets52@hotmail.com
Have a most wonderful day and as always God Bless