New profile posts

I was wondering if you may know what would cause a 7800 to make a sound like a european siren at full petal. This happens in 4H and 2H. thanks
Mark if your going to tear down the axle please get a Works Shop Manual. You will run into many more question doing this and even with the manual you will have questions. I can get you a discount on one through Carver Equipment just by mentioning OB1 to Tim Honeycutt....

Carver Equipment
1600 S. Clinton Ave.
Hwy 301 South
Dunn, NC 28334
910-892-7171
910-891-7171 (fax)
Vic,
New on here but have ben reading quite a bit, especially the steering articles you have been putting out. I have a b7000 that is loosing its ability to turn right... It is like something is slipping, It turns fine while moving but is unable to turn its wheels while sitting still. I just cleared the weep hole at the bottom of the column and got 4 or 5 oz of oil out. Pulled the steering rod from the top and got the assembly out. The hole is full of oil and its too late for me to figure out what to do with that. Now my questions. Should there be any oil there and if not, where did it come from. Second - when I get the oil out, what should I see?

thanks

Mike
Hi Vic.
Is there a grey Kubota that is offset row crop like the L245H?
Had a customer in yesterday who is looking for something like that. He has a International 140 now he says is worn out and he wants to replace it. I think he wants fairly new though.
Ed Service
Welcome to the forum.
I prefer original stuff because it was designed with their interests and product in mind but I must have a great price.
I said that to say this,... have you checked with Kubota Engine America? They supply the industrial side of business and have super prices. I priced at my Kubota dealer and with Vic here at over $1,800 for my "Z" engine build. At KEA I got all this stuff and much more for $745 or somewhere in that area. I got this tip from someone here and I was so glad I did so I am passing it along.
Good luck
http://www.kubotaengine.com/company/information.html
thanks! no deal around here,i'm looking at a new one. it will set be back around 3300.00
for a Normand whit hydro chute control.
good day to all.... please help me can you gave me a TRACTOR MANUAL SET/SERVICE MANNUAL of KUBOTA TRACTOR model B6000or B6000e......i appreciate if somebody post these...... tnx to all.......:confused:
good day to all.... please help me can you gave me a TRACTOR MANUAL SET/SERVICE MANNUAL of KUBOTA TRACTOR model B6000or B6000e......i appreciate if somebody post these...... tnx to all.......
Hello Vic,
I found a used hydraulic pump for my yanmar from a local, He deliverd the part to be sure i hook it up correctly so i would not bust another pump,He had me put back the power beyond adaptor and use that 3 rd hose to dump back into the reservoir, I explaned to him I thought could eliminate this connection, he said he could not let me do that while providing the Pump, I now have this hose in the way again, The Lift is working fine as is although now I have to find an adaptor to put in the reservoir fill hole. so? can this hose be elimintated without worry of pump damage? as stated before even though the old pump was cracked the FEL was working without the power beyond and by capping off the top port as you suggested, he said this was do to the pump being able to release fluid from the crack rather then building pressure inside, I do trust your advice Vic and would like to eliminate this 3rd hose again if possible? But I am cunfused>
as always Thanks,
Small & mighty
hi Vic!

i have a l3400 hst and i'm shopping for a snowblower. the kubota spec is telling me that i can't run a snowblower more then 60 inches wide, but can i use a 72inches anyway? thanks
I just bought a 2001 B7500 HST with FEL and backhoe. What years did Kubota manufacturer the B7500? I do believe that it was replaced with the B7510. Is that correct?
I have a B2400 with 1200 hrs.
It is into its 4th rectifier/voltage regulator.
The high $ Kub. dealer ones last about 2 yrs and the cheaper after market ones last about 1 yr. Can someone help me understand what may be causing this.

thanks
chufaman
Hi again Vic, sorry about the bad link, I forgot to mention and you may have forgot i sold my L-140 and now have a Yanmar 1700, this is what I'm in need of a pump for,
ebay has some under Yanmar hydraulic pumps,
Thanks man!
Hi Vic,
I decide to contact you rather then post up the link to these people I have found on Ebay with the Hydraulic pump I need, need to have someone who knows "parts" can you take a look at this? and see if it may be a good choise?
after all it is 100 bucks less than all others I found, but I am concerned about the quality?
or if one is as good as another? I know that now-a-days lots of products/Parts are made by the same manufactures in "CHINA" and distributed out to many companies in the US under different names,
I'm all about saving $$$ when I can although I don't want to be buying another in 6 months if this is some cheap knockoff just to make a sale, here is the link the their ad--> http://cgi.ebay.com/HYDRAULIC-PUMP-F...d=p3286.c0.m14
Vic, that wheel did in fact fit my L175 just fine.. actually the design brings the bottom of the wheel over the column shaft and protects the rubber seal from water intrusion and came with the cap to cover the nut in the center.
Carl
Yes, the rear PTO has a pulley to drive a 59" Wood's finish mower. There is also a mule that attaches under the axle that is not pictured. It has pulleys for the belts to head to the mower deck. I am debating whether I am going to keep it or sell it as my yard is tight and full of hills. If I can get it to discharge from the right correctly, I may use it to pull a cyclone rake (Rt hand discharge only) for leaf cleanup and give my Husq lawn tractor a break.
I'll post pics of the bracket when I get a chance. It is apart to be sandblasted and painted.
I am new to this web page but am looking for help on My Kubota 3130 HST problem that I posted. Any Help would be great.

Thanks
Thanks for your help
I have thought the clutch had something to do with this problem but i dont really know for sure. i'm goeing to be back out at the farm in the next day or so and i will see if i can answer that question.But yes it is intermittent it does seem to start when we jump the battery,but the battery is new.I sure appericate your help.
JIM GUNTER
hi vick
this web site is new to me and i dont know if i should be doeing this or not but i'm goeing to thy.
i have a l2550 kubota with a problem.at times it will not crank when i turn the switch on,i am familiar with the seat and the clutch. when i turn the switch on it will click and thats all,
the battery in new i hope i am em this to the correct sorce thanks JIM GUNTER