I’m curious as to the part number for the chute deflector on your snowblower? If I recall from your YouTube video, it operates off the 3rd function.
Thanks.
B7800; Starting issue- electrical; engine cranks, won't run; get 12v at solenoid, 5.9v at fuel shutoff relay ( which is brand new from dealer)
bypassed seat safety, forward reverse gear safety, pto is off; when I bypass the fuel shutoff relay and the solenoid clicks, engine runs ; sometimes it clicks, sometimes it doesn't. possibly bad relay?? Am I missing any other safeties?? Don't know much about the OPC??
Lift on L175 slowly leaks down even when I put valve in lock position. I am pretty sure the O-rings need to be changed. If someone has a clear break down pic of this valve that they don't mind sharing, it would be awesome. Thanks and have a blessed day.
i recently purchased a used G2160-R48S that i knew had a steering issue. it will turn 15 degrees left or right just fine. after that it turns really hard. i know i will have to diagnose further, but to start, am i looking at a power steering unit under the steering wheel or the rack and pinion below on the side of the frame?
randy
Sir,
I need a L285 steering gear box, P/N 34260-16110. I've tried all the salvage places, looked for aftermarket etc. contact me at natedozier at att dot net I did do a search on here already didn't find a match or I looked over it. Thank you muc
bird dogger, I sent you an email concerning the purchase of a set of these covers. When you get time check out your email and get back to me.
Thanks, Jim.
Hey Borg, I have what you are looking for. I was exactly where you're at about a month ago so I would like to return the favor that someone else gave me. Please send me your email address and I will send you the MX series operator manual.
Is your B7200 still available? Am in PA and looking for small garden tractor Will drive down if there is a place to rent trailer to haul back north Thanks Br
I just finished reading your write up on the L2501 Turbo and wondered if you ever followed thru with a turbo kit and install details. Your work looks really clean! My L is still in warranty but I don't want to let your mods get lost because at some point I will want to bump the HP and performance on my tractor.
Hi Chad - Quick question. Was reading some of your prior posts. You've said you bought a Woodmaxx FM62 (H?) but originally had the QH10 quick hitch on your tractor. I'm in a similar situation - have an L2501 and QH10 and an FM62H is on its way across the country to me. Woodmaxx says the QH10 is similar to the IMatch quick hitches and unfortunately will not work.
What did you do for yours? Were you able to get the QH10 working with a modification or did you change to the QH15? (I'm reading folks have had luck with the QH15.)
I'm impressed with the custom winter fronts you make!
I have a 2014 B2650. I bought it in the spring of 2019.
It was still brand new. Poor fella bought it, put 12 hours on it planting some trees then, unfortunately, he passed away. His widow had it in their heated garage for 5 years before deciding to sell it. I'm about to hit the 200-hour mark now. I put some time into it during the summer. I have 3 acres, my dad has 2 acres and I have done custom tilling for gardens.
I've been pushing snow with it this winter and I find it struggles to keep the temp above the bottom mark on the gauge. Just as you mentioned.
Hi there Oliver - been digging around a lot on OTT for information on flail mowers and found a post from you last year that said you are running the L2501 and the Woodmaxx FM62. This is actually the same combination I'm considering (probably with Y blades). Woodmaxx was trying to talk me into the FM54 instead (which even if I did want it, is not in stock currently, unfortunately).
Wondering if you can tell me a little more about your experiences with this combination and if it is still working out for you? Do you have the HST 2501? Any issues or problems you've run into with lacking PTO hp? Hills on your property? Any regrets on not getting the hydrostatic?
Thanks for the offer. It turns out a local dealer emailed it to me yesterday (same day i asked). I appreciate your gesture!