New profile posts

2014 M7060 153hrs. Had to tighten two loader lines for minor hydraulic leak. While cleaning up hydraulic oil, noticed diesel fuel wetting on heat shield below fuel filter. return line from filter housing split at the outer end of the nipple it was on. Appeared hose was not secured properly causing hose to pull down on end of straight nipple resulting in hose splitting. Able to cut off and reinstall.

New member introduction, I just bought a 2011 Kubota B2620HST. It only has 160 hours on the hour meter, this is the main reason I bought this tractor. It appears this tractor has spent most of its life parked outside. I plan on touching up the paint where it has started to rust. I will add a backhoe next year. I didn't buy this tractor from a Kubota dealership, so I bought it "as is". The tractor runs and operates as it should. The only thing I found out of order was the Range Gear Shift Lever. N neutral position is the M middle range and M middle range position is neutral. I have a friend with a Kubota B2620HST, I will look at his to see if I can figure this out. I would post photos but Insert Image doesn't work for me.

Sorry, didn't notice the notification. RR? Rail Road?

I have a B8200 I was wondering if anyone knew the bolt sizes for the loader mounts on the engine. I am in the process of installing a Loader with Quick-attach and I am not sure what the bolt sizes are. I am guessing that they are about a 12-14 mm bolt. But, I have no way of knowing the pitch. Are they 1.0 or 1.5 or 1.75 or something else. I got this loader off of A BURNT UP B7500. I am not sure if it will even line up as of yet. I believe my 8200 is around an 1989 or 90, but not sure, S/N 61250. I would appreciate any info you could give me. Thanks, madbarney

hello pat, i have a 2015 b2650 i want to put a hearter in also. and i want to add a 3rd aux port, im in n.y. i moved the machine from north car, to long island and there no one close to me so im reaching out to you for help thanks jim

I have posted once before about bx1870/2370. What do you think i should get? 5 acres, mow about 2, Some FEL work, no pto implements, scrape blade, landscape rake. Mow some 1/4 acre to 2 acre properties and pull a 16ft trailer for halloween events we have. Do i really need the extra HP or will the 1870 do? Idk if the 2370 is @2,500 better. Thanks in advance, and how to i post a new thread on here about this? i cannot figure it out.

BC if I may be so bold, may I ask where your from?

HAVE another great day! And many more

Hello again I'm messaging you here as for the life of me I can't find our exchange of emails and do it directly I have the loader fitted, the tractors' pump works quite fast enough for a loader so contrary to what I'd read about fitting a second pump off PTO front drive.
what I wanted to mention was the tap beneath seat to direct flow either forward or backwards, it has 3 positions not 2 and works in a horizontal position either fully left for 3PL or fully right for loader, just ask if you need images of what I've done Richard inconnus.les@gmail.com

If I may ask,,, Are you a RR buuff?

Hi mate, hope this isn't too cheeky but a while back you helped a bloke with an RCK60-24B mower deck - he asked about the gearbox oil spec and you said you had the operator manual. Are you able to help me the same way?! Just the correct (synthetic) oil spec would be a great help, but if you are able to send me a copy of the manual that would be really awesome. My email is (remove the zs) zneil.2011z@zhotmail.comz thanks and cheers from down under! Neil.

I have a ZD28 with the 72" pro deck and was wondering if anybody knew if the 60" fabricated, not stamped, deck would line up and fit in its place ? Just curious because I'm having problems with losing power and don't think that 28 hp engine is enough for that 72" deck. Thanks

Has any one got the owners manual for the l1501dt our the l185dt owners manual there could email me please

I have a L4150DT 4x4 and I have no hydraulics , I tore the tractor down took rock shaft cover off, saw chunks of gasket or brake material in bottom of case. Before that I took off hydraulic lines and all seemed ok no blockage. I have a canister filter on hydraulics , is there a screen I'm missing somewhere that might be clogged before I clean the case an reassemble ? I appreciate all input

Return of Kubota mower.... On July 20, 2016, the Kubato was delivered. I asked the mower delivery man if the mower had been inspected before delivery, he stated that everything had been checked. I tried mowing my lawn, but to my surprise the mower left lines in the lawn. Over numerous occasions dealing with the dealer and Kubota I have not gotten anywhere. The mower is still not fixed. I contacted both the representative and service manager and told them I wanted the mower picked up and my money refunded. I have gotten no response to this. I have called the Kubota Corp. for assistance with this matter, but have been unable to get in contact with anyone. I have emailed the service representative that came out to look at the mower, he responded twice but the last e-mail I sent has gotten no response. The dealer last called on September 20th, but I haven't heard a word since. Any suggestions would be greatly appreciated. Maybe a Phone number to a live body at Kubota Corporation?

Pat, I need another part. One of the quick connects for the FEL on the tractor side leaks when the loader isn't attached and the tractor is running. Its the male side... I need one of those.

Hi
I am wondering if any of the readers know of a rear end in good condition for a BX 2200 in good condition. Can't seem to find any online. The parts yards say they go fast.

Did you get a chance to see what you have?

Thanks for your suggestion on the hydraulic top link. I too love my Pats QH. I will have to consider your option. I really wanted to see what my options were for a single solid piece design should I come across a good deal on a used one in the future. Thanks again for your input and help.

Hello Vic. I have a massive fluid leak behind the instrument panel on my b20. I'm trying to figure out how to remove the instrument cowling to see where it is leaking. I suspect the steering column but don't know how to get to it. Any suggestions?