New profile posts

Hi, I have L1-455, some interesting problem tised up, battery sighn was flickering together with some sighn like oil level, there is sight on japanese only maybe somebody has user manual for instrument panel warning signals!

Just noticed he's on a bunch more as well. Don't you just wanna kick his a$$.
Thanks,
Dick

Vic, the escort guy is on another thread as well: 'Well the project is halfway and things are looking good'. Poster is ZYC123.
Dick

Hi Vic, the stupid new york escort chuckle heads are back. In the buying advise section under 50" reverse till hoe. Figured you would want to know. Thanks buddy. Hope everything is going your way.

I re-sent the request just now.

I know the owner was in Chicago last week for a class.....but I know he's back now......hope he can get 'round to this!! (grrrr)

hey, dave sorry for the late reply. if you could get the serial numbers/ model numbers for me that would be great! if you want to e-mail me the info when you get it, its mfsalafia@comcast.net thanks again for your time.

Dear Service Department Vic,

I wish to buy parts for my Kubota B6000 4wd.

I have the list of parts I require, subject to price and availability, as an Excel spreadsheet.

Do you have an E mail address I can mail the spreadsheet to?

Alternatively you can mail me at:

alan@tlcsiam.com

..and I will reply providing the spreadsheet as an attachment.

1. I wish to pay using my UK issued Visa card.

If that is not acceptable please let me know what methods are available.

2. Delivery would be to my address in Thailand which is where the tractor is.

Regards,

Alan Betts

Vic,
Could you shoot me a PM with a price for all of the decals I'll need when I repaint my B6000? It's a grey market 4WD job with the bolt-on tiller. Also let me know where to send the check, or if you prefer credit card.

Regards,

Hans

Tim sorry it took so long to get back to ya I just bought a piece of flat stock drilled and painted if you need any more info e-mail me @ bcbull378@aol.com and I can take a few more pics and measurments and send them your way I love the way the light work I have no problem working at night lots of light , take care buddy......Dan

Brilliant
Thank you very much.
Now to do the work!

hi vic,

i have a kubota mx5100 hydro. 4 wd. that i want to install 4 rear remotes on, would you please tell me what to get { dealer want to much} after market is fine.

thanks,
candyman

Vic
Thanks for the explanation of the Munroe hydraulic arm on my 1502M. Now for a very dumb question but ... if I remove the whole unit, how do I block off the hydraulic connectors i.e. do I need to put some sort of seal on the connectors in case the switch accidentally gets turned on or do they self seal? Thanks in anticipation. Ed

Tinker hows it going, I hope you had a grand new year and holidays with you and your family. I was wondering if you still had that PFD file you talked about sending me back in September,,, Im sure the big K would get silly about that, kinda like Harley does.
Yeah I know Im bad about getting things done sometimes, but with work and home and aged folks it gets a little crazy sometimes. Im sorry Im so late about getting back to you but better late than never, I guess, but I cant convince my boss of that,,lol.

So if you want to please send it to
skeets52@hotmail.com
Have a most wonderful day and as always God Bless

Steve,
I guess my primary use for the hydro toplink will be to adjust the tilt of the bush hog as the slope changes.

Would I have to throttle down to lower the cylinder with the single hose set up you have?

David

Hi There,

The L295DT in my pictures was one I rebuilt the motor and some steering linkage on last year....I sure wish it was mine though!

The owner is a friend, and I can send him an e-mail for the information on the loader - serial number/model number etc etc....but be forewarned....he's not (usually) quick with the replies since he keeps the 295 over at his dad's most of the time....

Hope your Christmas was great.....and next year better than ever.

Dave
Allyn, WA

i dont know if the msg. went. ??

hi vic, thx for getting back to me so soon.

hydro. fluid & filters changed 9/11, loader greased every 10 or so hrs., no bent anything or leaking.
i not sure if there is a problem { seems like it ] but i want to know how to check the pressure to see where it is.

thx, candyman or email me me at munstervalleyfarm@yahoo.com

please tell me the gauges & etc. i need & walk me thru the check.

hi vic, i have a kubota mx5100 hydro. the loader seems to be low on power, how do i check the hydro. pressure. thanks, candyman

I used to race LT1 motors but now I just race SBC motors.

"LT1" Pat....you have a older Chevy Caprice or LT1 motor in something?
I have a 9C1 in a '93 Caprice that I'm going to pull and put in my '73 FJ40 Land Cruiser.

Just curious.

FJ40Dave