New profile posts

There is a two year old message where you say you have owners manual and parts manual for the model 1200 loader. I sent a private message with my email address, if you can send one to me.

Thanks,

Scott

Keep removing bolts, you will figure it out.
Ask someone to post a parts/operator manual.

What parts do you need?
I didn't think a sprocket would be too expensive, I guess I'm wrong!

Might be worth the $200 being that a used tiller is rare.
I paid $1300 for a brand new King Kutter tiller.
Worth every penny.

Post some pics of the tiller, maybe it will jog someones memory and they will offer advise on how to.

thank you very much for your reply. the chain had cut through the bottom of the case on the side gear box im suspecting it may be stretched and there are teeth broken off the lower sprocket I got the top one out no problem but the lower one and chain come out so far and then stop about where the chain tensioner is located im thinking i may need to remove the tensioner as well but im not sure how to do that . the replacement parts are over $200 im not even sure its worth it the tines are badly worn things I didnt notice when I bought in the dark . finding a used tiller around here is like finding needle in a haystack ! I would love to find just the side gear box for sale . thank you Brad

hi vic if you could read my post on the forum any help will be appreciated . also if you know of any salvage yards or low price parts house it may not be worth a gearbox . thank you in advance

194 proof.... dahhhh!

Howdy Vic.
Any chance that this # is good? 15211-7305-1 that's a seal set for the water pump on my 1979 L245DT. I searched the "net" with no luck.
Hope you are doing well.
Milo

i'm looking for a set of used wheels and tires for a b2710 sizes are 180/85d/12and 12-4/16 i have ag tires on now i would like to get some turf tires and can i put just turf tires on the front is fwd

hi vic thanks for the help. I looked on the transmission and there isnt any ## or i cant see them i am geting older haha.Is there another place to look???. I did look on kanmon inter and theres a zb1402 and b1402 that look just like it. If it is that the american kubota would be ???

How do you change the transmission fluid on a L3800 - as part of the 50 hr maintenance?

Hope new filters fix your problem. Looking forward to hearing from you.

Don't remember visiting ... but their's a lot of things these day's I don't remember these days (67 YO). I only have an old L-1500, that I'm very slowly working on. I live in Mexico 1,000 + miles south of San Diego, so parts are really non-exhistant. Make a run to VA in San Diego every few months and then have to drive 250 miles to Bakersfield to get to TSC. We are entering our prime hurricane season till mid-October.
Regards,
Smokey

Don't remember visiting ... but their's a lot of things these day's I don't remember these days (67 YO). I only have an old L-1500, that I'm very slowly working on. I live in Mexico 1,000 + miles south of San Diego, so parts are really non-existent. Make a run to VA in San Diego every few months and then have to drive 250 miles to Bakersfield to get to TSC. We are entering our prime hurricane season till mid-October.
Regards,
Smokey

Hi, i saw whre you visited my page...this is the third big orange for me...I am a believer!

My B2150 has leaked power steering fluid out of the steering column. What do i need to do to sort this out. Also, where do I top up the power steering fluid? If anyone can help I would appreciate your help.

Thank you...Filters being changed today to rule out problem...I will update you...

how do i tow/pull safely ? keen to know how to hitch chains and which direction to pull in (drive or reverse?)

hi all, i would love to get some info on towing/pulling logs behind my L1500 tractor. keen to know how and where to attach chains etc. to avoid flipping.

Ok stuart,
I am interested in the workshop manual and parts manual.
B7001 mainly, but I think the 7100 manual could be useful.
When you can please send me some link.

Ok stuart,
I am interested in the workshop manual and parts manual.
B7001 mainly, but I think the 7100 manual could be useful.
When you can please send me some link.

If you are interested in the manuals for the related export models, please let m know, and I will send you some links.