New profile posts

Hi Vic I am in BC and I am looking to put a 3 point hitch on my B7000 and I just now realized I dont have the top link bracket. Any chance you have them or can I get them from Kubota? Or ebay? I was hoping for quick as I want to get this together. Thanks! Jeremy

Hokie 85, Just making sure Iam on right sight,Iam 61 and not a rocket scientist with this site.Boy Hokie they have me **** off.15,000 dollars pay them to service deck and I get a headache.I am praying it didn***8217;t hurt seals or gears.Thats my problem drain or take back and call main office at Kubota because it is out of warranty.Like I stated I will pay money for my mistake but not a dealers mistake.Thank Hokie

85 Hokie,Hello how are you?I haven’t been on here for awhile.Look I have a question.I have Kubota bx2370 with Rck54p mower deck.I took it off and had serviced,new belts,blades and gear box 80-90wt oil.It now leaks oil,I called service Mng.and told him manual states oil level should be just above lower drain bolt,they have oil at top bolt-fill bolt.From what I read it should be just above lower drain bolt,this way the gears sling oil all over and keep seal lubricated.I only have 280 hrs on tractor,about 80 hrs on mower deck.My question do you think I should drain oil to correct level or take back to them.Dealer is 60 miles away,***** service Mng said oil level should be at top fill bolt,wrong should be at bottom drain bolt.I paid 15 grande and had them service it to screw it up.What do you think call Kubota,drain oil to correct level or take back again.I have money to fix things but I am really angry service might have screwed it up.Drain or back?Thanks

85 Hokie and guys how are you?Rich R from South Jersey

Hello,
I was wondering if anyone knew if the rust-oleum Kubota orange is the new style or the old style orange? The one I'm looking at is at Tractor Supply.
Thanks Rick

You seem to be the go to guy for grey market tractors as well as being in Alberta. I was wondering if you have a B6001 parts print for front wheel final drive? Thanks

How do I start a new thread about issues with my B2400?

I gave my BIL your info(he owns the L3300),thanks.

Wildan,
I am, although I am pretty backed up. You can email me at markhdg@gmail.com, and you can look me up at www.stabilworks.rocks.
Mark

Are you still making the stabilizers?Would like a set for an L3300.
Web link or email address?

Hst drive issue.
I’ve got a Kubota L48.
I have recently changed hst oil and filter. Still having same issue.
Unit will work but is really slow. After about 20 to 30 mins unit will no longer move. I can pick up front and rear where tires are off the ground and tires will roll forward or reverse but no power to move machine. Unit worked better when it was really cold out. I used Mobil 424. Should I put a thicker oil in unit or do I have another issue. Hoping I don’t have to get pumps rebuilt. Implements are working fine. Bucket and backhoe aren’t lacking in power.
Does anyone have any thoughts?

Hi Deesil

Could you tell my where the pressure relief valve is located on you transmission? If it is to hard to enplane could you send a picture?

Mine is only 1750 psi and no deal up here is sure where it is (or want me to bring the tractor in)

Thanks
Al
awb855@gmail.com

Unusual old mower deck

Does anyone recognize the deck in the pictures?




[IMG]

[IMG]

My Kubota B5200 has a problem. The throttle lever no longer will stay "on" eg. In position. It slips back to low unless I hold it in position. I have checked the throttle pedal-see no problem with functioning, have lubed all of the various joint fittings. I have checked the the place where the linkage attaches to the engine block, and that nut is tight.
I did have problems this past winter with the throttle staying on even though I pulled the throttle level back to slow speed. There seemed to be a problem with the throttle pedal, and to slow the engine after I pulled the throttle level back, I could correct the situation by lifting the throttle pedal with my toe. But now, that problem has corrected itself, and instead, the throttle lever won't stay in position.
Looking for help here. Thanks for reading. Any help will be appreciated.

I’m wondering about an engine change on my B7100 HST. The D750 went down and I’m wondering if a D1100 would work with an adapter on the bell housing?

I have a L3400 standard trans. the pto grinds when I try to engage. is this a linkage adjustment or an internal clutch adjustment?

Howdy my friend, I am wondering if you can fill me in a bit as I have been away from radios for longer than I care to think about. I was looking at a Utube video and the guy was talking about a 10 meter export CB radio. Have they combine 10 and 11 meters ? Or am I missing some thing?
Thanks
Skeets

Thanks Lance.

Hello Ty
I do not have a engine or parts for your L5030. I do have lots of older Kubota parts.
Thank you Lance

Greetings,
It was recommended I get in touch with you regarding the availability or help with acquiring a crankcase and crank for an L5030 with the v2403 engine. I am in northern california and looking to get one quick. I was also recommended to check with Kentucky tractor and they have one for me. I was all set to order them but was told to ask you if you had or knew a good local source. Anyway, hope you don't mind helping a new guy out. Really appreciate all your time.

Best regards,

Ty