New profile posts

U55-4 Excavator
L2900 tractor with BL4690 backhoe and LA480 loader
BX 1860 with RCK48P mower
B7200 manual drive
B7200 HST
Teaching Automation in College, retired from INCO (the nickel guys).
Happy digging with the Orange machine!
One more post was missing from a thread about a B670 BH parts list, but that thread has not been re-posted by the OP, so no place to re-post my answer.
Posts that were just gone & I replaced were in "B7100 3pt hitch and ball hitch connection" from Service, Repair, & maintenance".

Also " So Now That Winter is Approaching" from "Off Topic"
The pics I mentioned needing to be replaced, "Show Us Your Shop & Equipment" posts 134-138, from "Off Topic"
Mr K,
Now I am having trouble trying to answer your inquiry- I keep getting a message "oops we ran into a problem, please post a message with less than 420 characters"
Mr. K
Mr. K
Got it, thanks Lil Foot. I updated a setting on our end to increase the size of posts on profile pages like this to lift the 420 character limit. I'll look up those other threads you mentioned to see where images might have gone off to. Thanks for those leads.
I serviced my L3940 and forgot to cut the fuel back on after changing the fuel filter. I started the tractor and it ran of course until it ran out of fuel, I cut the fuel back on it would turnover and attempt to start, but no cigar. I opened the cock on the fuel pump per the owners manual and cracked the fuel lines at the injectors to bleed off air, but still had no luck.
Any insights?
Thanks
Ed
So I drained the hyd fluid, cleaned filter, pulled the tractor apart installed new disc, clutch, and release bearing and it still will not go into gear while running. The clutch linkage is adjusted all the way out.
I have a troubleshooting question about my L1500DT. I'm having problems getting it into any gear once it warmed up. Going into gear not running is fine and I can start it in gear and will drive fine, cannot change gears.
Good evening. Are you still active on here?

I saw your old post about the charge relif valve blowing your hydraulic filter. Did that fix your issue? I'm having the exact same problem.
Hi there; Your contact came up in a thread from back in 2011 about a Kubota L170. I recently picked one up here in southern California. I have some questions and could really use a service manual. These are so rare here that answers and materials are hard to come by. If you can help please let me know. Thank you!!
aloha, I am new to the forum I am trying to revive our b7100 I was wondering if anyone out there knows of generic oil,air and fuel filters that can be used on the b7100
Good Morning SDT, I am new this this forum and new owner of a used B1750. I read a post you had commented in about locking the deck in the high position. Can you detail that process out for me as I would like to lock out so I can use the 3pt independently of the deck. Thanks for your help in advance.