New profile posts

Welcome to the site left you a answer and a link for parts numbers and diaghrams for you kubota.Hope you enjoy the sight and forum. handy

I'm just wondering but do you work with nasty chemicals or something that could have done this to you? Or have you been swimming in that Ohio river that caught fire?

Hang in there bro, you are a good man we are here for you.

Front loader hydraulic issues I think!

I have a BX2230 when the tractor gets hot the front end loader up and down controls do not function properly and the tractor makes a constant whining noise i have changed the hydraulic oil and filter and no change, no problem when the tractor is cold.Any ideas where to go next?

i have a new bx 2660 w loader any suggestions for weight balance without a rear implement

Thank you Sir!

Happy birthday fellow torus mine was on the 16th.

Vic, needing to replace a very stickly ignition switch on my L245H. Parts list call for 37150-31820 but can only locate a 37150-3800. The wiring diagram on the L245H and the L245 are identical. So will the 3800 match up? I also cannot find the seal 35219-16410 for the steering shaft. Is there some other seal to use or do I take a plate of neoprene and cut to fit? Thanks very much.

We bought a used Kubota which we are happy with. L2250 4wd. Problem someone ripped the wires off the hazard lights and the tail light. Here's the wires. YELLOW goes to the left tail light as well as a blue with white strip. On the right side it is just hanging under the fender. RED/BLUE goes to the hazard lights. BLACK is ground???? BLUE is ???
The wires are hanging off the parts but not connected under the seat. How should these be connected? ALSO - how do the hazard lights work. I pushed the hazard switch down and temporarily connect wires and nothing blinked?

We bought a used Kubota which we are happy with. L2250 4wd. Problem someone ripped the wires off the hazard lights and the tail light. Here's the wires. YELLOW goes to the left tail light as well as a blue with white strip. On the right side it is just hanging under the fender. RED/BLUE goes to the hazard lights. BLACK is ground???? BLUE is ???
The wires are hanging off the parts but not connected under the seat. How should these be connected? ALSO - how do the hazard lights work. I pushed the hazard switch down and temporarily connect wires and nothing blinked?

Thanks Bulldog! I appreciate it!

Hi ptwyz, I sure do hate to hear all this stuff you are going thru. My dad pasted last July. He had most of the same stuff wrong and a few others added in as well. Maybe this will make you feel a little better. The DR told my dad 6 yrs ago that he had 2 weeks to live. I know that if he would have listened to the Dr a little more and tried to eat what he was supposed to he would still be here. Dad was about as stubborn as a old mule so I guess you can imagine how well the Dr telling him what to do went over. Tell him not to eat sweets and every time you looked in his car there would be a box of debbie cakes. "They're for the kids" he would say with a strange scent of peanut butter and chocolate on his breath. You hang in there and don't let this stuff get you down. Just keep your chin up and try and do what you need to. The day my dad turned and started his down hill desent was when he just gave up. I hope you get to feeling better.
On another note, you sure do have a nice garage.

Well, I have an update for those who are in the know. I have full blown Type 2 Diabetes, My gall bladder is pretty much gone and is going to have to be removed. My pancreas is fried and I dont know what we are going to do about that and my liver has what the doctors say "extensive" damage and is going to have to be monitored closely. Well, now I'm depressed again, and will go back to bed.

Rusty nuts don't stand a chance here.............LOL

Captain Candle Wax

Thanks guy's I appreciate it! Gotta go in tomorrow for another day of testing. This is beginning to suck very much. I want answers now, not more testing!!!

Hi Vic,
I havent received any info as yet. I have also checked my spam mail, and didnt find any mail from you.
Thanks
Conrad

Looks like you and that other bear are watching your beer roll away..

Hello Vic,
I have a problem I hope you can help me with.
I just rebuilt the steering box an my L245F and all went well until I went to put the pittman arm back on. I can get to go about halfway but that's all. I have checked the alignment marks on the sector shaft and the arm and they line up but still can't get it all the way on.
I have cleaned and greased the splines on the shaft and I am stuck.
Any ideas how to get it back together.
Thanks for your help.

Nuffin just chillin!