New profile posts

Hey Vic. Need your help with my l 3001 dt steering box was removed and as you said water distroyed the bearings and ill need all the parts to rebuild it if you can call me and if you can please send me the scyhmatic for the assy and a parts list if you can you sent it to me befor but lost it on my other computor my # is 225-242-7822 e-mail is smokey196240@yahoo.com thanks for the help Perry..

Havent seen ya post in a while lil buddy, how've ya been?

Sorry it took so long to get back to you. I look in on OT but don't sign in often.
I have the quick release bucket so I only take that off to mow. My rear mower is about 800lbs so the loader helps to co-balance that even with the bucket off. As I've discussed in some threads, I bought 3" rear wheel spacers from The Tracks Company. They're well made and make me feel a little more stable both mowing the sides of hills and when using the FEL on a slight side tilt. I've still raise a rear tire off the ground a few times using the loader at odd angles with a 750lb weight on the 3 point.
I think widening the machine helps. I'd do it again and probably stay with the same spacers. I really don't see a down side as long as you have all your lugs tight. Hope this helps.

Despite what I just said the other day about widening the stance of the front wheels - it did not do well on the L185DT - I am interested to know how you have fared on the L3700, which is pretty close to the same as my new 3200. I do a fair amount of loader work; probably half the time I start the tractor it is to use the loader to move SOMETHING.
Since the loader is so easy to remove I've been planning on taking it off while mowing or tilling. My feeling was that without the loader, the tractor would be wide enough to give me reasonable stability.
Having said all of that, I'd still widen it, if there is no apparent down side. Your thoughts will be appreciated, and considered counsel.

Hi Vic,
Today I was mowing along with my B-7100 and saw a patch of thicker brush in the field and thought my Mid-Mower should be able to handle it. I slowed up eased onto it and my tractor engine stalled out just as I was getting into it. I've stalled the engine before and it always just started right back up. No loud noise or damage that I can tell but the engine now will not start up. It's cranks over but doesn't start. I waited for it to cool down and still no start. It cranks over and just puts out a little black smoke from the exhaust pipe. My fear is I didn't have the RPMs up high enough when I started over the brush with my mower deck and when it stalled it may have jumped time. I know nothing about these little motors so I don't know where to start looking to diagnose. Maybe a blown fuse or vapor lock? I would appreciate any help. Thanks much. Steve

The front half of the PTO shaft is stuck in our Kubota tractor's PTO --any ideas would be appreciated.

Hi Vic, I have broken the front axle housing on my zb5000. Would you have one or know where I might be able to find one? I have a guy welding it but because it is cast iron he tells me it won’t last. Would I be able to find on from a 7000 and make the switch or would that be a problem? There is a whole front assemble on eBay for the 7000 but not sure if the gearing would work? Any help would be appreciated thanks.

Hey Vic, I broke the pin on the drag link of my b1750 hst, I have a chance to get a used drag link from a b7200 hst p/n 67401-56400. It looks in the pic to be the same general shape. Are they basically interchangable, or am I going to buy a new part for my b1750? Thanks

pulled the head off my l245dt. new one ordered , hopefully this will take care of the antifreeze in the oil. pics in my profile.

Hi Vic. Can you take a look at my L245DT transmission post? I am in need of replacing the reverse shift fork and need to know what the process is.

How to remove front subframe BX2350?

It seems i remember someone posted a website where you could look up kubota parts. Also posted a parts house in canada that were cheaper. Im having trouble getting the chain and lower sprocket out of the side gearcase on a kubota fs850 tiller. I have the adjusting finger out but i cant get the other part out that goes through the side of the caseim assuming its a chain adjuster of some sort. Does anyone know of repair manuals online? Any help will be appreciated.

Hi, I have L1-455, some interesting problem tised up, battery sighn was flickering together with some sighn like oil level, there is sight on japanese only maybe somebody has user manual for instrument panel warning signals!

Just noticed he's on a bunch more as well. Don't you just wanna kick his a$$.
Thanks,
Dick

Vic, the escort guy is on another thread as well: 'Well the project is halfway and things are looking good'. Poster is ZYC123.
Dick

Hi Vic, the stupid new york escort chuckle heads are back. In the buying advise section under 50" reverse till hoe. Figured you would want to know. Thanks buddy. Hope everything is going your way.

I re-sent the request just now.

I know the owner was in Chicago last week for a class.....but I know he's back now......hope he can get 'round to this!! (grrrr)

hey, dave sorry for the late reply. if you could get the serial numbers/ model numbers for me that would be great! if you want to e-mail me the info when you get it, its mfsalafia@comcast.net thanks again for your time.

Dear Service Department Vic,

I wish to buy parts for my Kubota B6000 4wd.

I have the list of parts I require, subject to price and availability, as an Excel spreadsheet.

Do you have an E mail address I can mail the spreadsheet to?

Alternatively you can mail me at:

alan@tlcsiam.com

..and I will reply providing the spreadsheet as an attachment.

1. I wish to pay using my UK issued Visa card.

If that is not acceptable please let me know what methods are available.

2. Delivery would be to my address in Thailand which is where the tractor is.

Regards,

Alan Betts

Vic,
Could you shoot me a PM with a price for all of the decals I'll need when I repaint my B6000? It's a grey market 4WD job with the bolt-on tiller. Also let me know where to send the check, or if you prefer credit card.

Regards,

Hans