ZG127S Electrical

[foretexas]

Doing repair work, I knocked 3 wires lose by the solenoid. I have a green wire coming from the key switch area with a female connector, a blue wire coming from the bundled harness with a female connector and a blue/red wire also coming from the bundled harness and also with a female connector. The solenoid has one male connector open. I've arced the main terminals and the engine turns over, I've tried each of the 3 cables connected to the open solenoid post but engine does nothing. I've searched the area and see no other possible male connectors.
Thanks

 

[whitetiger]

You could just look at the wiring schematic below.

 

[Russell King]

You could just look at the wiring schematic below.


View attachment 174065

Is there a legend for the colors? I have no idea what color those letters stand for (and I doubt most people would know).

 

[Bee-Positive]

Here's a picture of the wire harness. Not sure how helpful since the only parts available other than the whole harness are fuses and grommets.

 

[GreensvilleJay]

The WSM will have the colour code, usually page before the diagram
from memory..
B black
R red
GY gray
Or orange
Br brown
RY red, yellow stripe
YW yellow ,white stripe
WG white, with green stripe
RW red, white stripe
G green