Hi I have a RCK60P-400Z (also known as Z421). It stopped moving forward or reverse. When I looked, the high tension spring was on the ground and as i was looking further i saw a shrouded belt hanging down. I have looked on all the parts diagrams and can not seem to locate a diagram of that belt. Could anyone direct me to that? I don't yet know what the part (belt) is called. Thanks for any advice I have got to try and fix myself as the shop is 120$ PER HOUR. RICK
Z421 belts
- Thread starter rick sheltra
- Start date
This the one? Part #120, watch for the serial number break if any other parts are needed. Luckily the belt has the same part number.
RCK60P-400Z is the deck model number.
RCK60P-400Z is the deck model number.
Thanks so much MOOT! Gonna go check it out now
Hey Moot, UPDATE.
Because you pointed it out, i now realize I was looking at the deck belts, but this is the drive belt for the HST, right? I kept thinking this was the belt on the deck oh well good excuse Im old. LOL
Would it be easier to get the belt on if I take the mower deck off? I think the tension bar, grooved nuts and spring are ok, but i will probably need the belt.
Thanks
Rick
Hey Moot, UPDATE.
Because you pointed it out, i now realize I was looking at the deck belts, but this is the drive belt for the HST, right? I kept thinking this was the belt on the deck oh well good excuse Im old. LOL
Would it be easier to get the belt on if I take the mower deck off? I think the tension bar, grooved nuts and spring are ok, but i will probably need the belt.
Thanks
Rick
Last edited: