WTB Top Link for L4600

[bronzefly]

I'm looking for a Kubota Top Link Assembly TC430-71100 for the L4600 model. Thought I'd check to see if anyone might have kept theirs after upgrading to a hydraulic model. Please PM with any info, thank you!

 

[BigG]

Take the old one to any equipment supply and match it up. The after market one are much less costly.

 

[bronzefly]

Take the old one to any equipment supply and match it up. The after market one are much less costly.

Thank you. I talked to our local Kubota dealer about this. There is literally a $400 difference between the OEM model and an aftermarket model. I didn't get a very good explanation why there was such a vast difference. Made in Japan vs Made in India was about as good as I could get!

 

[WoodKutter]

Not impressed with the kubota top link. Not nearly as beefy as my John Deere 750 which has 1/2 the hp.

 

[MtnViewRanch]

Thank you. I talked to our local Kubota dealer about this. There is literally a $400 difference between the OEM model and an aftermarket model. I didn't get a very good explanation why there was such a vast difference. Made in Japan vs Made in India was about as good as I could get!

Get a cat 1 top link with a minimum working range of 22"-32". Anything more is better.

 

[bronzefly]

Get a cat 1 top link with a minimum working range of 22"-32". Anything more is better.

Thanks for the information guys. I can't see any real reason not to save the $400+ and go with an aftermarket.