Ok, I was able to locate and purchase a 2 way valve and it is installed and working on my B5100E, It came off a B7100 so they do use the same valve in case anyone is interested. It takes a little bit to get familiar with how this valve works so I will explain it, The valve has an arrow on the "T" shaped handle, When the arrow is facing inward(towards the left side of tractor when sitting in seat) the valve operates the 3 point hitch, to turn the valve you must stop the engine,place the 3 pnt hitch lift handle toward the rear and turn the valve so that the arrow on the handles points to the port on the end of the valve(towards the right when sitting in the seat) Do Not try to turn the valve when the engine is running and do not turn the valve half way, It must be turned so that the arrow on the T handle faces either right or left, Any other position can possibly damage your hydraulic pump as can trying to turn valve with engine running.
