G General Colon Pile New member Nov 15, 2014 1 0 0 monticello ark Nov 15, 2014 #1 Can anybody tell me the trick to getting the balls and tubes in the ball nut steering shaft? There are 54 balls and two tubes but I can't figure out how they go in the worm gear/ballnut assembly.
Can anybody tell me the trick to getting the balls and tubes in the ball nut steering shaft? There are 54 balls and two tubes but I can't figure out how they go in the worm gear/ballnut assembly.
R Russell King Well-known member Lifetime Member Equipment L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop Jun 17, 2012 5,365 1,415 113 Austin, Texas Nov 16, 2014 #2 There is a three part article on the site that goes through repairing a steering box. Here is a link to part one. http://www.orangetractortalks.com/2010/01/how-to-repair-a-steering-box-part-1/
There is a three part article on the site that goes through repairing a steering box. Here is a link to part one. http://www.orangetractortalks.com/2010/01/how-to-repair-a-steering-box-part-1/
kubotasam Well-known member Equipment B2410, B7100dt, B7500,Woods BH750,Landpride 2660RFM, Tiller, B2781 Snowblower Apr 26, 2010 1,204 128 63 Alfred Maine Nov 17, 2014 #3 Look at this thread. Be sure to look at all 3 pages. http://www.orangetractortalks.com/forums/showthread.php?t=9027&highlight=ball&page=2
Look at this thread. Be sure to look at all 3 pages. http://www.orangetractortalks.com/forums/showthread.php?t=9027&highlight=ball&page=2
skeets Well-known member Equipment BX 2360 /B2601 Oct 2, 2009 14,554 3,306 113 SW Pa Nov 17, 2014 #4 And you thought this was gone be easy, and fun,,,,lol
CaveCreekRay Well-known member Lifetime Member Equipment L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler Jul 11, 2014 2,631 100 48 Cave Creek, AZ Nov 17, 2014 #5 A trick is to "glue" BBs in with fresh grease to a race and then carefully set it into the other race. Not sure if that will help in this case... Post a video of you trying!
A trick is to "glue" BBs in with fresh grease to a race and then carefully set it into the other race. Not sure if that will help in this case... Post a video of you trying!