Workshop Manual
- Thread starter NC Steve
- Start date
My dealer sold me a copy on a thumb drive for $15. If yours won't do that pm me and I can share the file on my Google drive just send me a PayPal for $10 so I can put it towards tractor stuff I want but feel guilty spending money on things I want ( nice to have) but don't really need ( gotten by without but......)
LX 2610 Service
Doing my first maintenance oil and tranmision change. Are there 1 or 2 filters? First Service 189 hours. Can you use an air compressor type pump to take out the oil? What is the lower/smaller opening on the engine (says oil like the higher up one) On the hydro side of things, are the...
www.orangetractortalks.com
link for manual here
Last edited:
If you want or need a paper copy, why not go to Staples with the PDF and have them print it for you and 3-hole punch it for a binder? Then you can take out a specific page, and make a copy of the page to take to the garage with you for a particular repair. I do this all the time with the assembly manuals for my cars. It keeps the original clean and I have what I need at hand.
I have a small commercial printer that I purchased on eBay and I can print a small manual on that, and it will even print on both sides of the paper so it comes out looking like a book, but most times I print on one side of the paper. Computr paper isn't that expensive when you buy the 500-sheet package at COSTCO.
I have a small commercial printer that I purchased on eBay and I can print a small manual on that, and it will even print on both sides of the paper so it comes out looking like a book, but most times I print on one side of the paper. Computr paper isn't that expensive when you buy the 500-sheet package at COSTCO.
Side note...
When my dealer was penciling up the quote for my BX2380, he said he'd give me a copy (digital) of the WSM for free. I chuckled. Then told him to order me the Hard Copy and I will pay for it. And while you're at it, order me the Parts Manual as well.