Wiring diagram for L2501 lighting?

[The Evil Twin]

Hey folks,
I have some issues with the rear lighting on my unit. The turn signal on the left works. The right only has the fender light blink. Hazards don't all come on.
Anyway, I know it's warranty but if it's simple enough to fix I'd rather just do it. Especially since it's getting dark earlier and I am clearing dead trees along the road at the back of our property.
If someone has one, or can point me at a free one that would be great!
Many thanks!

 

[ayak]

 

[The Evil Twin]

Can't thank you enough @ayak ! This will significantly cut the troubleshooting time!

 

[The Evil Twin]

Huh...not as simple as I thought, maybe. The Hazard unit will be my first bet. Unless they plugged lights into the wrong plug. Should be easy enough to rule out.
Thanks again!

 

[edritchey]

You can download the WSM HERE it will be easier to read and have everything on your L2501

 

[The Evil Twin]

Well shoot, @edritchey . Thanks for pointing that out to me! Things I never knew existed #10543

 

[The Evil Twin]

Well, looks like I earned some humility points today. Took another look at the lighting since it is raining today. In tracing out the problem I learned to not overlook the basic stuff. My knowledge of circuitry made me overconfident.
The root of the issue? Bad grounding on the little eyeball lights that sit on the fenders. I should have found that before moving on to any other part of the circuit.

 

[ctfjr]

ahh, I had one of them also. The nut was so rusted I didn't want to destroy anything trying to get it off. I just used Mouse Milk to loosen it a little and worked the light back n forth. Tightened up and gtg.