Wondering if this tractor has any way to switch to 540 vs 1000 pto. For some dumb reason it has 1000 and 1000 reverse. Not sure if it can do 540 or not.
White 2-105 pto speed?
- Thread starter Shadow_storm56
- Start date
https://www.tractordata.com/farm-tractors/000/5/6/566-white-2-105.html
Says it has 540/1000. Got photos of the gear shifters around in the cab area? More the merrier....
Says it has 540/1000. Got photos of the gear shifters around in the cab area? More the merrier....
It seems to me the tractor should have two sets of gears in the PTO housing. You remove a snap ring on the back, pull out one shaft and install another to change speeds. One shaft engages one set of gears, the other shaft engages the other set of gears.
www.reliableaftermarketparts.com
158281A PTO Output Shaft 540 RPM for White 2-85 2-88 2-105 2-110 ++ Tr
One New Aftermarket Replacement 540 RPM PTO Shaft Fits White / Oliver / Minneapolis Moline Tractor Models: G1355, G955, 1750, 1755, 1850, 1855, 1955, 2-105, 2-110, 2-150, 2-85, 2-88, 2255, 4-150Tech Info: Length: 9.970"6 Splines (output) 21 SplinesPart Number: 158281A,158281N
www.reliableaftermarketparts.com
NCL4701
Well-known member
Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
The two speed Whites I’ve dealt with (very little) work like this:
Not swearing that’s how the 2-105 works. I think the guy in the video is demonstrating on a 135. But your pic shows 540RPM splines running 1000RPM? And a reverser?
I’ve never seen one with a reverser. Looks like you’ve got a pretty weird setup there.
Not swearing that’s how the 2-105 works. I think the guy in the video is demonstrating on a 135. But your pic shows 540RPM splines running 1000RPM? And a reverser?
I’ve never seen one with a reverser. Looks like you’ve got a pretty weird setup there.
It seems to me the tractor should have two sets of gears in the PTO housing. You remove a snap ring on the back, pull out one shaft and install another to change speeds. One shaft engages one set of gears, the other shaft engages the other set of gears.
158281A PTO Output Shaft 540 RPM for White 2-85 2-88 2-105 2-110 ++ Tr
One New Aftermarket Replacement 540 RPM PTO Shaft Fits White / Oliver / Minneapolis Moline Tractor Models: G1355, G955, 1750, 1755, 1850, 1855, 1955, 2-105, 2-110, 2-150, 2-85, 2-88, 2255, 4-150Tech Info: Length: 9.970"6 Splines (output) 21 SplinesPart Number: 158281A,158281N
Its strait single set inside I think I'm stuck with 1000 ....
It seems to me the tractor should have two sets of gears in the PTO housing. You remove a snap ring on the back, pull out one shaft and install another to change speeds. One shaft engages one set of gears, the other shaft engages the other set of gears.
158281A PTO Output Shaft 540 RPM for White 2-85 2-88 2-105 2-110 ++ Tr
One New Aftermarket Replacement 540 RPM PTO Shaft Fits White / Oliver / Minneapolis Moline Tractor Models: G1355, G955, 1750, 1755, 1850, 1855, 1955, 2-105, 2-110, 2-150, 2-85, 2-88, 2255, 4-150Tech Info: Length: 9.970"6 Splines (output) 21 SplinesPart Number: 158281A,158281N
I was very confused I put the stub in the other slot and hooked up a pump and I was like..... reverse????? Why would anyone ever want reverse. I just assumed it was 540
I have to look it up the reverse pto slot exists for specific things for loading grain I guess. It was an option apparently.
I think the 540 spline was because they ran a 540 implement and it let it just sit there and idle to run it.
It's incredible it's so specialized I have 2 pto slots and both are useless haha.
BAP
Well-known member
Lifetime Member
Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
I’m confused by your question!!! You are asking if the tractor you posted a picture of can use 540 because it has 1000, but the picture you posted is 540 PTO shaft!!! Is your picture not the actual tractor or are you confused??