Where can I find the "quick release pull apart" hyd. fitting that go into the aux hyd lines on th back of my L3710?Are they an exclusive Kubota or can they be found elsewhere? Thanks for any info you can provide.
Where to buy pull apart fittings?
- Thread starter Chevelle
- Start date
85Hokie
Moderator
Staff member
Lifetime Member
Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
here is one, not sure the type and size........Where can I find the "quick release pull apart" hyd. fitting that go into the aux hyd lines on th back of my L3710?Are they an exclusive Kubota or can they be found elsewhere? Thanks for any info you can provide.
might need to do some research on the size, people will chime in and tell you in a while
http://www.mcmaster.com/#high-pressure-hydraulic-hose-fittings/=tr0iqb
gpreuss
New member
Lifetime Member
Equipment
L3200DT w/FEL, K650 Backhoe, 5' Rotary, 40" Howard Rotavator, 6' Rhino blade
The fittings are DIXON, 3/8". Your local hydraulics/hose supplier should have them. It is never a bad idea to pull one of the fittings off and take it with you, or at least take a close-up picture of the male fitting with your camera or phone and take that. My local suppliers charge about 1/2 of what Kubota does...