What Is On Your Drawbar?

[ironbender]

Kub 2650
Trying to resolve what to attach to the draw bar to be able to hook a strap or run a chain onto it.

Can't find a clevis that is both small enough for the pin to fit through the hole and big enough to fit over/under the draw bar.

Any help?

 

[bcp]

Drawbar hook for chain.

http://www.agrisupply.com/hook-for-...chAdv&zmam=77232640&zmas=1&zmac=1&zmap=106077

Screw pin anchor shackle or straight shackle for strap.
https://www.google.com/search?q=Scr...xbDYAhVX-mMKHfSyAlgQ_AUICigB&biw=1466&bih=705

Bruce

 

[D2Cat]

Guess I got the clevis you couldn't find!

 

[200mph]

I have a big clevis that has a pin diameter of 0.875" on my L3130. Blue color clevis in photo

Just so happens I bought a 3/4" clevis from Harbor Freight (black one) for something else and it almost fits. The pin fits through the hole, but doesn't have enough clearance to fit on the drawbar completely. It's very close and would need a very small amount of material removal to fit without issue.

L3130 drawbar thickness: approximately 1.26"

What size hole is in your drawbar and what is the thickness?

Hopefully the pictures will help.

 

[Cathy Liebchen]

standard 3/4" clevis for us

 

[ironbender]

Drawbar hook for chain.

http://www.agrisupply.com/hook-for-...chAdv&zmam=77232640&zmas=1&zmac=1&zmap=106077

Bruce

That's the ticket. Thanks for the link Bruce!

 

[ironbender]

I solved my problem and it was embarrassingly simple. The clevis fit closely enough that all I needed to do was remove a tiny bit of material. Really not much more than polishing the innards of the pin area.

https://i.imgur.com/amwVjnX.jpg

https://i.imgur.com/256ta9J.jpg


eta: pics too big. ckick link to view.

 

[RCW]

I usually have a twisted clevis on. Just what I'm used to using, and bought a box of 6 or 8 at an auction years ago. Most are kinda bent up, but they work!

 

[Stmar]

I solved my problem and it was embarrassingly simple. The clevis fit closely enough that all I needed to do was remove a tiny bit of material. Really not much more than polishing the innards of the pin area.

https://i.imgur.com/amwVjnX.jpg

https://i.imgur.com/256ta9J.jpg


eta: pics too big. ckick link to view.

That's what I did, just used the dremel and took very little off the pin.

 

[DocHolladay]

I think this is the one I bought. It could have been the next size up.
Twisted Clevis

 

[Blondie70]

A big ole shackle like 200 mph.

 

[Doctor481]

2***8221; trailer ball for now. Been moving the boat out of the shop when working on bigger projects. Usually a clevis modified to fit the bar.

 

[Bigshooter]

Guess I got the clevis you couldn't find!

Me too.

Buy one that is close and grind the burrs and flash off of the insides.

 

[Kubota Newbie]

What's on my drawbar? Uhmmm. Nothing!

The M4500 came with a clevis style drawbar and a factory pin to fit.
Yes.... I still have the original pin, but rarely use it except for tow straps or chains. It's too big for most of my implement tongues.