What did you do to or on your Kubota today?

WFM

Well-known member
Premium Member

Equipment
L3800
Apr 5, 2013
1,359
705
113
Porter Maine
Nothing to exciting. But a rock outside my shed where I plow snow.
It's slowly keeps getting higher. I took my pallet forks and dug around it loosening it up. I finally could see it move slightly.
Then went to my bucket. And dug it out. Couldn't pick it up. It's about 3x3x3. But was able to lift it slightly and slide it.
Filled in the hole and spread crushed gravel I had bought a couple months ago.
 

Attachments

  • Like
Reactions: 7 users

Mitjam

Well-known member

Equipment
M-108, M6-111, Lx3520, Rtv-520 and LandPride implements
Jan 14, 2013
243
268
63
Edmonton, Alberta, Canada
Thanks ... I almost ordered the Land Pride tan but thought better of it so changed my order to Kubota orange .... and thank goodness! 😂
Good choice or you would be like me running a tan landpride wishing you had orange
 
  • Haha
Reactions: 1 users

mdhughes

Well-known member
Lifetime Member

Equipment
L3901DT
Dec 10, 2014
1,259
756
113
Ste Geneveive county, MO
If you don't mind me asking what brand of wood boiler are your running and are you running storage with the boiler. I have a Garn that just started leaking again yesterday. Might be time to look at a different brand.
It is an AquaTherm. This is our second one. We got 24 years out of the first one.
 

mdhughes

Well-known member
Lifetime Member

Equipment
L3901DT
Dec 10, 2014
1,259
756
113
Ste Geneveive county, MO
Took the backhoe off the tracotr so I could use the land plane. This is the second time that I have used it. I worked on the shared private road. We had some hard rains last week and there was a pretty good rut that needed worked on.
 
  • Like
Reactions: 1 user

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
Did some ditch mucking and stump pulling this weekend...

Start

ditch start.JPG


While I was mucking it out, I decided to R&R the existing concrete pipe since it sat about 5 inches too high :rolleyes:

Here we go...concrete pipe was heavy...6 foot sections at 15" inside diam.

ditch 2.JPG


ditch 3.JPG


ditch 4.JPG


ditch 5.JPG


ditch 6.JPG


oh, these two have to go...

ditch 7.JPG

ditch 8.JPG


done...figured I'd throw some seed down now anyway.

ditch 9.JPG


ditch 10.JPG
 
  • Like
  • Wow
Reactions: 12 users

MotoBBQ

Member

Equipment
L3902 w/ LA526 loader; rotary cutter; box blade
Jun 26, 2023
13
89
13
MN
I did my 50hr service. When I went to discard the old filters, a magnet fell out of the hydraulic filter. I was paranoid and removed the new filter and found it did have a magnet on it already. Thank goodness I used Kubota filters. Wasted more UDT2 and made a mess. Then cleaned the barn floor and power washed the Kubota. Too hot and miserable for pictures. But atleast it's ready for more work.
 
Last edited:
  • Like
Reactions: 7 users

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,847
5,070
113
Eastham, Ma
Did some ditch mucking and stump pulling this weekend...

Start

View attachment 133705

While I was mucking it out, I decided to R&R the existing concrete pipe since it sat about 5 inches too high :rolleyes:

Here we go...concrete pipe was heavy...6 foot sections at 15" inside diam.

View attachment 133708

View attachment 133709

View attachment 133710

View attachment 133711

View attachment 133712

oh, these two have to go...

View attachment 133713
View attachment 133714

done...figured I'd throw some seed down now anyway.

View attachment 133715

View attachment 133716
Nice job, per usual!
 

Siesta Sundance

Well-known member

Equipment
L305DT, MX 5200, SVL 75-2, (Sold M7060))
Oct 23, 2022
1,585
2,028
113
78125
youtube.com
I didn't like the weeds in front of my newly acquired shop, limted my access with trailers, so I pulled them up! Size 10 work boot in picture.
Screenshot_20240729_100816_Gallery.jpg


20240729_100845.jpg


Screenshot_20240729_164721_Gallery.jpg


20240729_100345.jpg
 
  • Like
  • Haha
Reactions: 12 users

rc51stierhoff

Well-known member

Equipment
B2650, MX6000, Ford 8N, (BX sold)
Sep 13, 2021
2,611
3,186
113
Ohio
  • Like
Reactions: 1 user

Moose7060

Well-known member

Equipment
M7060, L3902 HST, Farm King PT740, HLA 2500 Snowpusher, LandPride RCR1872
Oct 14, 2023
582
1,373
93
bc
Yesterday I used the B and the pallet forks to bring Oscar out of the barn…any guesses as to what Oscar is?
I've been waiting patiently for the answer ever since you posted this in the home grown section yesterday. I have no idea but looks interesting. Potato scrubber?
 
  • Haha
Reactions: 1 user

rc51stierhoff

Well-known member

Equipment
B2650, MX6000, Ford 8N, (BX sold)
Sep 13, 2021
2,611
3,186
113
Ohio
Yeah, so far no takers on the homegrown thread…I thought I would give this thread a try and see if the gen pop has any idea…it’s not a potato scrubber.
 

Moose7060

Well-known member

Equipment
M7060, L3902 HST, Farm King PT740, HLA 2500 Snowpusher, LandPride RCR1872
Oct 14, 2023
582
1,373
93
bc
Yeah, so far no takers on the homegrown thread…I thought I would give this thread a try and see if the gen pop has any idea…it’s not a potato scrubber.
I didn't really think it was but was hoping to get the ball rolling on guesses. :)
 
  • Like
Reactions: 1 user

BT3101

Member

Equipment
L3130 GST, FEL, Taylor Way BH W/Subframe, Rotary Cutter, Pallet Forks
Mar 20, 2016
40
92
18
Evansville, IN, USA
Now don't you folks who spent all that money on grapple buckets feel silly...? ;)

Ghetto Grapple 1.jpg


Ghetto Grapple 2.jpg
 
  • Haha
  • Like
Reactions: 9 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,390
6,472
113
NW Montana
I finished up cutting my friend's fields this afternoon. The M6060 and RC3712 did very well.

I disturbed a couple of fawns and took a photo of one of them, the smaller of the two. There were hundreds of flies on the glass, including horse/deer flies so really nice to be inside a cool, comfortable cab.

01.jpg


02.jpg


03.jpg


04.jpg


05.jpg
 
  • Like
Reactions: 8 users

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,824
4,304
113
Central Piedmont, NC
Yesterday I used the B and the pallet forks to bring Oscar out of the barn…any guesses as to what Oscar is?
I’m not at all sure, but I’ll give it a guess.

Looks like some sort of miniature thresher. Have seen a few mini-threshers that were foot (treadle like an old sewing machine) or electric powered for processing small batches of various grains. They looked a lot like Oscar. 🤷‍♂️
 
  • Like
Reactions: 1 user