I cheated and did a quick forum search and found the information and some pictures of his work. Contact Mark at markhdg@gmail.com if you are interested in a pair.
What did you do to or on your Kubota today?
- Thread starter gurn
- Start date
Here's a link to his website.
www.stabilworks.rocks
He's a great guy to deal with. Paid $225.00 with shipping for my set. They are all hand made by Mark. Basically remove the chains and turn buckles and bolt these on. Easy as pie. There is a bit of a wait for them. I contacted Mark sometime in late spring. He was up front about his expected wait times. Figured I lived with the chains for so long the wait was fine. I Liked that I was supporting a small business too. His quality is very good. Attention to detail is excellent as well. Even the pins he sends with, tethered to the arms and a spring ball detent. No extra keeper pins, can't drop the pin and loose it, and one handed adjustments. Just really thought out and simple.
HOME | Stabilworks
www.stabilworks.rocks
My LX came with 'em, but those do look a little beefier.Here's a link to his website.
He's a great guy to deal with. Paid $225.00 with shipping for my set. They are all hand made by Mark. Basically remove the chains and turn buckles and bolt these on. Easy as pie. There is a bit of a wait for them. I contacted Mark sometime in late spring. He was up front about his expected wait times. Figured I lived with the chains for so long the wait was fine. I Liked that I was supporting a small business too. His quality is very good. Attention to detail is excellent as well. Even the pins he sends with, tethered to the arms and a spring ball detent. No extra keeper pins, can't drop the pin and loose it, and one handed adjustments. Just really thought out and simple.HOME | Stabilworks
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
Probably the best engineered & best built accessory I've added to my tractor. 
www.stabilworks.rocks
HOME | Stabilworks
www.stabilworks.rocks
Yeah the newer tractors come with them, and there are retrofit kits for some modules of tractors. I haven't been impressed with the retrofit kits from kubota and the generic telescopic stabilizer kits are pretty much a bad joke imo.
I wonder how the arms that Messicks had manufactured for the BX series tractors compare to the outstanding quality of Mark's arms?
I haven't seen a set in person, but I have studied photos. I won't comment on quality, just list differences that I see- I use larger/thicker steel, grade 8 bolts instead of pins and clips, cable lanyards to keep the pins from getting lost, and I warranty mine. I'm not sure if a customer can reach out to the manufacturer that Messick's uses, but I can be reached 7 days a week. The Messicks set is $210.27 shipped, mine is $215.00 shipped.
I cut and chipped some of the tops the logger left behind.
Them I dropped the chipper and mounted the snow blower.
If we have a good stretch of weather I will put the chipper back on.
I think I will rent a good size excavator in the spring and do some stump removal
I also mounted some new tie down hooks.
Them I dropped the chipper and mounted the snow blower.
If we have a good stretch of weather I will put the chipper back on.
I think I will rent a good size excavator in the spring and do some stump removal
I also mounted some new tie down hooks.
johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Started pulling implements out of the tree line and putting them on Harbor Freight dollies in the new barn. Made a possum very upset when I moved the brush cutter and they lost their nice dry home
johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Ran like hell the opposite way I was going. I’m sure it will find a nice dead tree or one of the neighbors trucks that are parked outside to live in
Thanks, went to his website and also sent him an email.Here's a link to his website.
He's a great guy to deal with. Paid $225.00 with shipping for my set. They are all hand made by Mark. Basically remove the chains and turn buckles and bolt these on. Easy as pie. There is a bit of a wait for them. I contacted Mark sometime in late spring. He was up front about his expected wait times. Figured I lived with the chains for so long the wait was fine. I Liked that I was supporting a small business too. His quality is very good. Attention to detail is excellent as well. Even the pins he sends with, tethered to the arms and a spring ball detent. No extra keeper pins, can't drop the pin and loose it, and one handed adjustments. Just really thought out and simple.HOME | Stabilworks
Biker1mike
Well-known member
Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
First snow deep enough to plow. About 4 inches and less than an hour of seat time. New led headlamps are sweet.
Did not hit anything and did not break anything so the season is off to a good start.
Did not hit anything and did not break anything so the season is off to a good start.
The chains fetching up is due to the wide R-4 and/or R-14 tires without wheel spacers. R-1’s give you and additional 3 to 4 inches of room for sway arms on 3-point hitch. I had to keep arm tension very tight and the implement centred, no room to off-set, as your and my photos show!
Attachments
Biker1mike
Well-known member
Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Groundhog day. Back out to plow what fell overnight.
Plow shoe found soft grass and I ripped up the lawn a little. Nothing new. In the spring I put everything back where it should be. Dirt into the lawn and gravel back to the driveway.
johnjk
Well-known member
Lifetime Member
Equipment
B3200 w/loader, Woods RC5 brush hog, 4' box blade, tooth bar, B1700 MMM,
Got the important stuff moved in to the new barn. Will work on everything else the last two weeks of the year when my son is home to help. I need to get shelves in so I don’t have crap everywhere
Attachments
ajschnitzelbank
Well-known member
Lifetime Member
Equipment
L4701, BH92, Frost Bite grapple, Logosol M8 mill, Stihl MS661
A large plastic tarp would have covered the tractor and provided you will have a lot less work cleaning it off. I used to cover my tractor with a blue plastic tarp, and then brush the snow off of the tarp and then pull the tarp off of the tractor to go snow blowing.
I would wait a little longer for your carport to be delivered since everyone is backed up with getting materials. This past fall I enclosed the rear and one side of my metal carport. I had bought the material a couple of years ago, but couldn't put it on alone, and finally got a couple of friends to give me a hand. Now I wish that I have bought enough to do both sides, and then I could build a wooden front to it with an overhead door to keep the snow out of it.