What did you do to or on your Kubota today?

[Rosher18]

Three things:
Lifted my wife up to the rafters of our horse arena to blow the dust and bits of bird nests off of our lights
Graded the arena footing with ~200 lbs of water in a rain barrel on my box blade (definitely dug deeper with the extra weight!)
Ran out of fuel halfway through the job, and it was working hard, so I had to do two 100 yard dashes to get fuel so I could get it started before it overheated.

Huge thanks to the orange people here that have posted about the 185 bleed procedure, it worked like a charm!

Sent from my VS986 using Tapatalk

 

[skeets]

2 questions... WHy didnt she raise YOU up to clean things off ,, and 2 what kind of hay burners do you have?

 

[Aluthin]

Put new ignition switch on my b6000 as it was missing one just had a toggle switch. Also replaced the glow plugs. Wow what a difference am sure the old ones were the originals..... And also repaired the connection to the glow plug indicator..... Fired first time wow what a difference......

Sent from my MotoG3 using Tapatalk

 

[Ryansweatt2004]

Installed a landpride 3rd function kit and a landpride sgc0660 grapple that I scored off of Craigslist yesterday. Got pretty much everything hooked up but the wires. That will happen tomorrow.

 

[skeets]

Nasty cold and rain,,so a good day to muck about in the garage,,, oil and filter, and 2 fuel filters,,, Number 1 filter,, I dont know how this beast even ran with the crap in that one I cut it open and ,,, I dont where all that crap came from but it was full,, number 2 was clean as a whistle, I guess I could have let it go but I had a new filter and,, well why not

 

[Daren Todd]

Loaded up the L1501 with the box blade and went and graded a driveway. Forgot to take before pictures, after the 7" of rain last Saturday got it. But here's the end result.

Sent from my iPhone using Tapatalk

 

[Rosher18]

2 questions... WHy didnt she raise YOU up to clean things off ,, and 2 what kind of hay burners do you have?

We own two thoroughbreds, and have a full Arab, tri-color paint, and thoroughbred-quarter horse mix boarding. I raised her up because she loves to use her Black & Decker leaf blower

Sent from my VS986 using Tapatalk

 

[Ryansweatt2004]

Got my new grapple a little muddy yesterday afternoon from moving rocks and boulders to build up the back edge of my yard where I plan to extend my lawn a bit.

 

[skeets]

I raised her up because she loves to use her Black & Decker leaf blower
LMAO,, good answer Thoroughbreds, humm ok.... Quarterhorse Hmmm ok
I use to raises Arabs (40 years ago), the kid raises them now out in Ca.
We had an old paint mare, sis picked up a paint mare a free to a good home horse, that turned out to have papers top and bottom and was trained as a hunt horse and had competed in the Rolling Rock races for several years, and then went on to place number 10 in cross country in Pa until I retired her

 

[Ryansweatt2004]

Spent this evening loading boulders into a one to dump 1/2 mile up our road wth my new grapple. Got four loads like this before the light started fading and before it started raining again. My yard is starting to look like a boulder field now. Going to start building up my back yard with all these free rocks.

 

[mdhughes]

Pulled part of my driveway back up the hill after all the rain we have had. I wonder how I ever got along without a box-blade.

 

[redmaher]

Pulled part of my driveway back up the hill after all the rain we have had. I wonder how I ever got along without a box-blade.

Just bought my first box blade yesterday can't wait to use it. Hope I didn't pay to much for mine.

Sent from my LG-H901 using Tapatalk

 

[Rosher18]

As I posted in the Service, Repair, & Maintenance section, I moved a lot of mucky horse turn out footing across the property and managed to break my right front wheel. Just need a new wheel, re-mount the old rubber, and get back to the task at hand.

Sent from my VS986 using Tapatalk

 

[Racer X]

I mowed the grass with the L260 I picked up the other day.

L260 And Mower by Racer, on Flickr

No wheels were broken, but several million blades of grass were slain.

 

[Creature Meadow]

Changed the oil and washed and cleaned the engine area.

 

[aeblank]

I grappled away some rotten pallets and branches.....


layed out some (sacrificial) pallets and put some of my palletized wood on it.






Built a "custom" pallet for my stall mats. I use them to save my garage floor, since my v-bar ladder chains are MEAN.










Also cleaned out the woodshed of all the bark/leaves/dirt that seems to accumulate. No pictures of that though. BUCKETS on tractors are boring.

 

[Flienlow]

Installed some badly needed down spout drains.

 

[OBKubota]

Reminder to self -use wrench to tighten bolt when putting bumper on [emoji33]

Sent from my iPhone using Tapatalk

 

[mpham]

Put the mower on the 3pt. Removed the plow pusher plate and gave it a coat of paint. All set for next year now, and a season of grass cutting.

 

[baronetm]

Sold my 1995 B7100 HST what I paid for it used 11 years ago.

Took delivery today of a New L3901HST w/ FEL and 3rd function, BH77 back hoe w/ mechanical thumb. Dealer installed 3 grab hooks on front bucket and one on BH, wheel spacers, bucket level indicator, loaded rears (Rim Guard), front and rear LED lighting on ROPS and 50 hour service labor and materials at no additional cost just to make the sale. Now I should be able to move wet snow with ease.
My first tasks, added rubber floor mats and removed what turned out to be a 3 foot bolder from my lawn that I have been chipping the top off of for 30 years, now I don***8217;t have to raise the mower deck anymore.