what amp fuse is on the rear work light circuit on a BX for ROPS lights?

[hockeystewey]

Hey guys... I ordered my ROPS lights and I want to tie into the rear worklight circuit lead that is under the fender, but what amp fuse is on that? If I run both front and rear I need 14 amps. This is in regards to a BX1880 if that makes a difference. I bought the ROPSLIGHTS.com kits. 2 front and 2 back, just wondered if I can have them both on the same time....kinda should have thought of that before i ordered I guess....LOL

Oh, Well...Thanks Guys !!!!

 

[85Hokie]

Hey guys... I ordered my ROPS lights and I want to tie into the rear worklight circuit lead that is under the fender, but what amp fuse is on that? If I run both front and rear I need 14 amps. This is in regards to a BX1880 if that makes a difference. I bought the ROPSLIGHTS.com kits. 2 front and 2 back, just wondered if I can have them both on the same time....kinda should have thought of that before i ordered I guess....LOL

Oh, Well...Thanks Guys !!!!

Look at your fuse box .....should be a fuse marked AUX or something like that.

If in doubt - have meter hooked to rear leads....pull the fuse.....

Im guessing 15a or 20a

 

[mickeyd]

On my L3200 it is 10 Amps.

I run my LED lights and my sprayer off of it without any problems. I guess you could put a higher amp fuse if necessary.

 

[hockeystewey]

Hey , when I got home I took a look..... there is a fuse listed Work Light 20 Amp....Just to answer my own question... For everyone's future reference

 

[charleneandrich]

14a is a lot for lighting these days. LEDs draw so little that you may want to swap out the bulbs.


Sent from my iPad using Tapatalk

 

[bulliebullybull]

All this ties into the back free hanging wire that’s for the optional work light. It’s easy to see


Sent from my iPhone using Tapatalk

 

[hockeystewey]

14a is a lot for lighting these days. LEDs draw so little that you may want to swap out the bulbs.


Sent from my iPad using Tapatalk

I thought so too, but I got the papers from the ropslights.com folks and thats what it says they draw...

3.5A a light

 

[Rdrett]

I thought so too, but I got the papers from the ropslights.com folks and thats what it says they draw...

3.5A a light

Wow they but be some big led lights.
I would like to see the setup.
I have enough lights bars on mine to light up the whole field and they don’t draw that many amps.

 

[Scottsjeeprolet]

Hey , when I got home I took a look..... there is a fuse listed Work Light 20 Amp....Just to answer my own question... For everyone's future reference

The 20A is always hot, the other wire is 10A ignition hot. I used the 20A so I can run mine even with the tractor off.