I went to put away my B8200 for the winter. It is one of two I have and the one I'm dealing with is my parts tractor. It runs fine but has been idle for the summer. I hadn't noticed that I had parked it under a roof overhang and water had entered the exposed exhaust pipe. There is a lot of water and it wouldn't start. I have drained the oil and refilled with some fresh oil. I was wondering where I should proceed from here. Pulling the injectors and putting some WD 40 and turning over to flush the injectors? I have to get it started because it is on an island in Georgian Bay and must be protected from harsh Canadian winters. Any advice would be greatly appreciated. Time is a factor here. Thanks