Valve Stem Replacement Help

[fruitcakesa]

The stem on my rear loaded tubless tire completely failed and I used one of these to replace it from the outside in 5 minutes and it is holding fine: https://www.amazon.com/Hardline-Pro...t=&hvlocphy=1027455&hvtargid=pla-732118930019

 

[GeoHorn]

Here’s a nifty device for common rubber stems (not the metal ones obviously):
CHECK OUT THE VIDEO IN THIS LINK:

https://www.amazon.com/AME-51025-Quick-Valve-Change/dp/B005K8E9FY/ref=psdc_15709141_t3_B003V9VZ42

 

[fried1765]

Here it's just a stem cap
View attachment 91769

The handiest/best!
Put 'em on all 4 tires!

 

[allis15]

Here it's just a stem cap
View attachment 91769

I have had a couple of these 4 way valve tools for longer than I can remember.

Very Handy Tool

G

Amazon.com: Slime 20088 4-Way Valve Tool with 4 Valve Cores : Automotive

 

[The Evil Twin]

I have had a couple of these 4 way valve tools for longer than I can remember.

Very Handy Tool

G

Amazon.com: Slime 20088 4-Way Valve Tool with 4 Valve Cores : Automotive

Yessir! I have one that does refrigeration and automotive cores. Also has taps to clean up the threads in the stem.

 

[North Idaho Wolfman]

This thread has opened up a lot of "new to me" products that could definitely help me out in the future!

 

[D2Cat]

They work like the swedge lock anchors for concrete. Simple but effective.

 

[Vigo]

Yeah you can get all kinds of valve core tools including those little 4 ways with the taps and die on them, valve stem dust caps with the tool on top, double ended with the bigger hvac side on the other side, a 'torque wrench' clicking style etc etc. ALL of them are cheap. I think i bought a 5pack of the screwdriver style for $10 on amazon because i teach tire machines and the students lose 2 or 3 every semester. I used to have the spares in my desk drawer but they're gone now so i guess it's time to order another 5pack.

 

[DustyRusty]

Learned a lot about metal valve stems and now the difficult part is determining which is the best choice. Here are the 2 choices that I have narrowed it down to. Price isn't a factor, because we are only talking about a $7 difference in the 10-pack of valves. Both say that they are for filled tires. Can you help with the selection? These are to replace the rubber stems when I fill the tires with Rim Guard or some equivalent. The Kex is the First Picture and the full thread is the Hornet second picture. Pictures of the actual part courtesy of Amazon dot com (US)
thanks

https://www.amazon.com/KEX-TR501-Straight-Brass-Tubeless/dp/B07N3W2ZQQ/ref=pd_bxgy_img_d_sccl_1/133-7345794-8515017?pd_rd_w=w03st&content-id=amzn1.sym.839d7715-b862-4989-8f65-c6f9502d15f9&pf_rd_p=839d7715-b862-4989-8f65-c6f9502d15f9&pf_rd_r=5X2RX111S109J5C6TZ90&pd_rd_wg=1YZGs&pd_rd_r=74c1d9d5-ff4c-470c-88c7-438f8aac9d2a&pd_rd_i=B07N3W2ZQQ&psc=1

https://www.amazon.com/Hornet-Tire-TR618A-Tubeless-Agriculture/dp/B08L9Q71BH/ref=pd_ci_mcx_pspc_dp_d_2_t_1?pd_rd_w=mAg3s&content-id=amzn1.sym.568f3b6b-5aad-4bfd-98ee-d827f03151e4&pf_rd_p=568f3b6b-5aad-4bfd-98ee-d827f03151e4&pf_rd_r=JY8P8G3CW14JGKKW7TXW&pd_rd_wg=ihzsp&pd_rd_r=17704b03-39b3-43aa-9bee-000c6bfaf539&pd_rd_i=B08L9Q71BH&th=1

 

[DustyRusty]

Bump.... looking for some guidance..

 

[D2Cat]

People always say, "You get what you pay for!" If that old saying is true, buy the more expensive ones! Since I don't really know about which might work better I'd buy the ones advertised for agriculture.

 

[North Idaho Wolfman]

If you're going to just air fill them either will work.
If you're going to fill them with liquid get the second ones.

 

[The Evil Twin]

Bump.... looking for some guidance..

Not that it helps much, but my tractor has the ones in your 2nd photo.