V1702 leaking injection pump

dpetty

New member

Equipment
L2850
Oct 25, 2012
2
0
0
Dickson, Tn
I have a L2850 with a leaking injection pump. I've removed the holder delivery valve and replaced the copper washer and oring, but is still leaking out the threads. What else can I do other than pulling the pump and doing a complete rebuild?
 

kc8fbl

New member

Equipment
2014 L3200 HST FEL, 1949 Minneapolis-Moline R
Aug 23, 2012
222
0
0
Gobles, MI
I've never had one apart before, but can you use a little thread tape on it to have a better seal? Hope this helps.
 

kuboman

Member
Dec 6, 2009
725
6
16
Canada
There will be a washer farther down in that is leaking. You will need to pull the complete valve out of the pump. It has been a while since i had one apart but if you pull both halves of the valve out you will see what needs to be changed. Be carefull of the spring and needle valve. You will likely need a magnet to get the bottom half out.