unused plug

[bwssr]

I just bought a new L3200, and of course looked it over...a lot once she got home. On the left side rear, at the light there is an unused plug...taped up and out of the way.
Anyone know what this would/could be for?
I'm thinking a rear plate light.....
Thanks!
bruce

 

[978Peter]

That is for the optional rear work light.

 

[bwssr]

cool.....do you happen to know the max wattage?....I'm thinking around 10 watts...so LED would be the way to go....I had plans on adding a rear license plate light so it would allow me to see all the hook up points...any thoughts?

And THANKS!

 

[978Peter]

I used to have an L3400 with the spare plug under the fender. I traded it in for an MX5100 in December 2011. It also has the plug which is for the worklight. If i remember correctly on both models it is for up to 40 watts. I would check with your dealer how much wattage the optional work light is. However using 10 watt LED should be perfectly safe. Have fun with your new tractor.

 

[bwssr]

THANKS all!

 

[UWAdventurer]

The plug under the fender of my L3400 has two 55W back hoe work lights hooked to it and the relay for two front aux lights also. It is on a 10 amp fuse in the fuse box.