Trouble with m125x implement plug

[Millers800]

I'm having trouble with my implement outlet and was wondering if anyone could give me some help.

 

[100 td]

So those who are willing to share their valuable knowledge may comment, I expect you will need to describe in detail what trouble you are having and what you have already tried to rectify the situation.

 

[Millers800]

We just got some new gravity wagons that have lights and when I plugged them in not all the lights work. I have flashers, tail lights, turn signals and side markers. But the unload light over the door doesn't work. I tested the outlet on the tractor and 2 of the pins have no power to them and I don't know why. I checked all the fuses and they are good so why would there be no power to these pins?

 

[100 td]

I don't know your model or trailer outlet, but having flash/tail/turn/side is a good sign. Is the light over the door normally on with the tail lights? Check what pin the door lamps are wired to and see what it corresponds to on the tractor. At a trailer plug you need at least one ground connection, then separate circuits for various things, depending on model variants. Do you have a service manual for the tractor with a wiring diagram in it? Do you have a diagram for the trailers you just bought? Do the lights work on other trailers when plugged into this tractor?