Trash Cans

[chuck99z28]

Has anyone seen a quick attach front loader attachment to pick up and carry those large residential garbage bins?

The trash truck that comes buy grabs them and lifts them and dumps them all from the cab.

The curb is a 1/2 mile of gravel road away so dragging it out to the curb is a big effort. I use one that clamps on the bucket now, but it slips and slides unless you really bear down on the clamp and then it bends eventually and gets loose again. I also tried the ones that go in a receiver hitch. But I have a good tractor and would like to just grab and go without getting out of the cab.

So I'm looking for hydraulic clamping arms to grab and lift and conform somewhat around the bin like the big truck has.

Anyone see one of those?

 

[In Utopia]

There is a post somewhere on this site about this subject, and how one person solved it.
Try doing a search and see what it brings up.

 

[wendol]

Check this out

https://www.orangetractortalks.com/forums/showthread.php?t=24013&highlight=trash

 

[GreensvilleJay]

one option..
If you have forks, put cans on a skid...
I find it easier to fork a skid than trying to grab anything with the bucket.....

 

[B737]

https://r2manufacturing.com/

they are really handy, sometimes they are not listed on his website, but if you contact him he may have some. He makes great products. get an edge tamer while you're there

 

[RonBoyBX25D]

I like the bucket mount, but here is an option for the 3 point. I was looking into it for the lake property. Best of luck with your choice.

https://heavyhitch.com/product/hitchn-can/

 

[maclean]

I have a BX withe the Kubota quick attach. I welded up a bar with nothing but a 2" receiver and some chain hooks.

You'll find a ton of premade can holders for 2" receivers...or did what I did and make your own...

You can bolt a 2" hitch to you front bucket... backhoe...pallet forks...zillion options... including using your truck.

 

[B737]

the receiver version is pretty cool cause then you dont need the loader attached, just your 3 point bracket

 

[chuck99z28]

Check this out

https://www.orangetractortalks.com/forums/showthread.php?t=24013&highlight=trash

Thanks for the link.

I have the R2 product, it works, but I think I can do better.

The FEL receiver hitch is a cool idea, I could use that for other things too.

Thanks all