Tools you want to brag about?

[Lil Foot]

I don't often tout HF tools, but I bought this wrench set for my latest restoration project. (same job I used the inspection camera on)
It might be the nicest/handiest wrench set I own.
I needed to reach a long distance up & under a motorcycle fender and remove/replace some 10mm nuts.
Without this set, I would have had to remove the rear axle, rear wheel, two sets of rear brake linkages, chain, and both rear shocks.
The 10mm is 10 1/8" long!
The 19mm is 15 5/8" long.
Good selection of sizes too.
It worked great, felt good in my hand, very fine ratchet, and saved me a lot of work/time.
I see this set being very useful on future projects.
Kinda pricy, but you gotta pay to play.

https://www.harborfreight.com/extra-long-professional-metric-double-box-ratcheting-wrench-10-piece-56653.html

 

[North Idaho Wolfman]

The 10mm is 10 1/8" long!
The 19mm is 15 5/8" long.

Wouldn't that be
10mm is 257mm
19mm is 397mm


A tool is never too pricey when it does the job you need it to do.

 

[Lil Foot]

Wouldn't that be
10mm is 257mm
19mm is 397mm


A tool is never too pricey when it does the job you need it to do.

Another indication of my American machinist reluctance to embrace the metric system.
I have been able to adjust to calling the wrench size as a 10mm, but I draw the line at stating the length of the wrench in millimeters.

 

[Runs With Scissors]

Those look like they certainly will be useful, and I also love a nice “fine tooth” ratcheting mechanism for those "tight spots"

Tools are kinda strange like that.

I/we have tons of them that just sit there, sometimes for months/years….but when you need them, and you can just walk over and grab it, they are worth every penny.

 

[jaxs]

Those look like they certainly will be useful, and I also love a nice “fine tooth” ratcheting mechanism for those "tight spots"

Tools are kinda strange like that.

I/we have tons of them that just sit there, sometimes for months/years….but when you need them, and you can just walk over and grab it, they are worth every penny.

Are both or only one "worth every penny" when you have to buy another because after "months/years" you forgot where the first one is?

 

[Motion]

Nothing gives more joy than having the chance to use my 19/32" socket or wrenches which I purchased in '66. To say lightly used is an understatement.

 

[Hugo Habicht]

Are both or only one "worth every penny" when you have to buy another because after "months/years" you forgot where the first one is?

That is the trouble. When I need a special tool, often home made, I cannot remember where it lives and I end up buying or making it again

 

[Daylight]

 

[North Idaho Wolfman]

View attachment 166351

You forgot this one!

 

[Old Machinist]

Nothing gives more joy than having the chance to use my 19/32" socket or wrenches which I purchased in '66. To say lightly used is an understatement.

AHH the infamous 19/32 socket. Ye it is a joy to see.

 

[McMXi]

Kinda pricy, but you gotta pay to play.

I've never had a problem spending money on lifelong investments such as tools. I'll brag about this TEKTON 3/4" drive deep 6-point impact socket set that I bought to use on the M-1078. I've since sold the truck but still have the set and will have it to the end of my days. It's a heavy box to lug around.

Around the time I bought this TEKTON set, I also bought an OTC torque multiplier (1,000 lb-ft) to use in combination with this set.

Amazon.com: OTC 7367 Torque Multiplier - 1000 lb-ft : Automotive

Buy OTC 7367 Torque Multiplier - 1000 lb-ft: Torque Struts - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com