Started to mount a tool box on the LX2610 HSDC and this looked like the best spot for now as it has a backhoe for the tractor. I did not drill into the loader frame it just is using a hole that was there.
![20230324_142358[1].jpg](https://www.orangetractortalks.com/forums/attachments/20230324_142358-1-jpg.98772/)
![20230324_142429[1].jpg](https://www.orangetractortalks.com/forums/attachments/20230324_142429-1-jpg.98773/)
![20230324_142459[1].jpg](https://www.orangetractortalks.com/forums/attachments/20230324_142459-1-jpg.98774/)
Tool box option for those with a cab tractor.
- Thread starter cthomas
- Start date
Runs With Scissors
Well-known member
Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Looks good.
Did you fab the bracket or is that a spare tire bracket for a trailer?
Did you fab the bracket or is that a spare tire bracket for a trailer?
rkidd
Active member
Lifetime Member
Equipment
B2650, FEL With QA 60"mmm, 3pt FDR1672,homemade ballast box, BB 1572 box scraper
A few years back I designed and fabbed up tool boxes for my B2650 rops and my buddys B2650 cab model.
Fabbed them up out of 1/8 steel all welded together that used the existing holes in the loader frame to mount them to. Kept them even with the loader frame on the bottom for protection and pretty even with the machine width wise. They have worked out really well over the years.
Fabbed them up out of 1/8 steel all welded together that used the existing holes in the loader frame to mount them to. Kept them even with the loader frame on the bottom for protection and pretty even with the machine width wise. They have worked out really well over the years.
Attachments
