Titan pallet forks

[Smokeless]

https://www.palletforks.com/skid-st...-42-pallet-fork-trailer-hitch-attachment.html

Bout to take possesion of my new L 3901

Pallet forks high priority. Anyone have any experience with the above forks? So far, looks suitable for my applications

Thanks

 

[dirtydeed]

I have the same set. No problems with them. The forks are quite heavy. The receiver is quite handy (I wanted this style to move boats/trailers around. They work great). I was hoping to find a receiver mounted plow as well.

I think for the money, they can't be beat...Just beware that the welds look like they were done by a child...pretty likely in china.

 

[Kennyd4110]

Just beware that the welds look like they were done by a child...pretty likely in china.

Yes...most of Titan's products are imported from China, you else do you think they can so severely undercut US manufactures?

 

[dirtydeed]

Yes...most of Titan's products are imported from China, you else do you think they can so severely undercut US manufactures?

I don't disagree with you. I was only trying to provide the OP with my experience with the equipment. I did purchase a bucket clamp on style hitch from them and it was of very nice quality.

 

[Smokeless]

I have the same set. No problems with them. The forks are quite heavy. The receiver is quite handy (I wanted this style to move boats/trailers around. They work great). I was hoping to find a receiver mounted plow as well.

I think for the money, they can't be beat...Just beware that the welds look like they were done by a child...pretty likely in china.

Well thats a good testimonial, thanks. Am leaning on pulling the trigger, just keep watching local auctions and craigslist in case something pops up. Thanks

 

[mdhughes]

I have a set and I'm very happy with them. The welds on mine are done very well.

If you are like me and don't have the money for a set made in the US, these are a good chose.

 

[yoteantidote]

I have a set and I'm very happy with them. The welds on mine are done very well.



If you are like me and don't have the money for a set made in the US, these are a good chose.

Just looked at your equipment list, but you don’t have an extra $150.00 for American made ones?
I hope your Chinese welds never fail.


Sent from my iPhone using Tapatalk

 

[Smokeless]

I fully understand the concern for shabby welds, and sub par steel as well.
A friend of mine asked me to weld a bracket back in place on their tractor. Long story short, the bracket peeled away right on the weld, appeared flux core to me. Ground in off, rewelded and all fine, but too many manufactures are skipping steps.
So i will watch them. Fully acknowledge uss better stuff, but for my application and the capability of 3901, we just wanted to verify these are suitable. Unless used ones come by i think these will do, especially i dont see real negative feedback. Thanks to all

 

[Redhooker]

Those are more than suitable for the 3901. I use the $250 Titan set (they weigh under 300# total) on the same loader and they will handle far more weight than the fel can lift. I am lucky if I can lift 1500# with the forks so not exactly pushing the envelope here. The set you are looking at are rated 800# more than mine, with the LA525 we don’t need heavier duty-better to get the lightest set you can to lift the most weight.