Time to test the Toothbar

[mikester]

Just one word of advice, be careful walking around your bucket. Those edges can hurt when you run into them not paying attention. Nothing like firsthand experience to learn from.

Avoid flip-flops too!

 

[JJ1951]

i called my local kubota dealer and they only have a blade, not a toothbar. Have a 66" bucket, inside is 65 1/4", any suggestions please?

 

[JeremyBX2200]

i called my local kubota dealer and they only have a blade, not a toothbar. Have a 66" bucket, inside is 65 1/4", any suggestions please?

I purchased a bxpanded piranha tooth bar.

 

[Bmyers]

i called my local kubota dealer and they only have a blade, not a toothbar. Have a 66" bucket, inside is 65 1/4", any suggestions please?

You can order one from Bxpanded. If I remember correctly you can put your measurements in there and they will make it to your size and/or will let you know which one fits your bucket. Been a few years since I ordered mine.

 

[Downeaster]

I purchase that toothbar last winter for my BX1880. This spring it turned my BX into a little monster. Surprising how much more I can do with it. I can put it on and off in minutes. It will do more than I ever expected after using the standard blade on the bucket. I have been waiting for cooler weather, to use it, as I physically cannot stand high heat. Looks like maybe this coming Sunday here in Maine the weather will be in the 70's with dew point dropping from 70 to 55. Hooray. I can get busy again.

 

[Bri-Guy-GA]

I am looking to add one to my BX1880 in the future. Does the tooth bar affect the removal of the loader? I take the loader off every week to mow and then its back on. I hate to damage the bar in the process.

 

[johnjk]

As many have stated, mines never been off. Great addition for ripping field olive and multiflora roses out of the fields and tree line.

 

[Sawdust&Shavings]

I am looking to add one to my BX1880 in the future. Does the tooth bar affect the removal of the loader? I take the loader off every week to mow and then its back

Removal/attaching loader is the same with tooth bar.

 

[Trimley]

An easy way to protect yourself and others from the sharp edges is to cut off the required length of 4" drain pipe and cut it in a straight line length wise. Open the cut edge and slip over the dangerous part.

View attachment 100794

A piece of 4" fire hose would work ideal too

 

[Runs With Scissors]

i called my local kubota dealer and they only have a blade, not a toothbar. Have a 66" bucket, inside is 65 1/4", any suggestions please?

The one I made was a quick, fun, little project to make.

I have no idea if it works worth a spit, I've never actually used it, but I think it looks 'bad a$$'

 

[Downeaster]

I am looking to add one to my BX1880 in the future. Does the tooth bar affect the removal of the loader? I take the loader off every week to mow and then its back on. I hate to damage the bar in the process.

Go Pirahna, All you have to do is choose the BX when choosing size.