Hi Guys i hope you can help I have a L1500DT and have managed to snap the left hand steering arm, i ran into something, and im really struggling to find a replacement for it ,can any one help ?? please
Steering arm
- Thread starter Jonmiller
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Shipping from the US to France is going to probably cost more than the part, maybe you can get lucky and look on Ebay in the UK or there abouts to find one closer.
If you run into a complete stopping point give lance(007kubotaguy) a shout he might be able to get you one.
If you run into a complete stopping point give lance(007kubotaguy) a shout he might be able to get you one.
Would it be possible to have it welded or otherwise repaired? I don't know the size of the material or what it looks like but I had a machinist repair a broken front axle on my old Mitsubishi tractor. He squared the ends then bored and threaded each half and put the threaded portion of a one inch eight line bolt tightly into each side. He ran pins through so it couldn't come apart. It may have been running that way for ten years now.